AudiWorld Forums: A4 (B5 Platform) Discussion

2008: Audi Year in Review

Long Term Garage: 2009 A5 3.2 quattro S-line

Bound for Detroit: Audi R8 V10 Breaks Cover

B5 A4 FAQ || B6 A4 Forum || B7 A4 Forum || Audi A4 Pricing Info

[Reader Tips] [Search Forums] [Post Picture] [Post New Thread]

Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [>>>]
Total Threads: 330010, Total Pages: 6601

RIP: My 98 A4 was totalled out today from a >5mph crash. - PKmode 2009-01-07 12:51:36 (52 views) Must have been a lot > than 5mph to slide 35 feet AND do that much damage.. - Kris Hansen 2009-01-07 13:02:32 (11 views) Nope, really that far and that speed.Had my mother and sister in the car so I was extra precautious. - PKmode 2009-01-07 13:10:55 (14 views) Bummer. Well, I feel for you.. Out of curiosity, ABS working on your car? - Kris Hansen 2009-01-07 13:29:01 (7 views) Yep. It was trying real hard to no avail. - PKmode 2009-01-07 13:41:01 (3 views) That's the problem. ABS on ice = no stop. You'd have been better off with NO ABS. - Kris Hansen 2009-01-07 13:58:24 (0 views) wish i could sell my one b5 already its killing me - Agent90 2009-01-07 12:55:23 (7 views) damnit! - tehaudi 2009-01-07 12:55:13 (22 views) That is the plan. Coming soon. Now even sooner. - PKmode 2009-01-07 13:11:53 (0 views)
B5 A4 = FS forum now? - Mica 2009-01-07 12:16:28 (13 views) Last night I was lying awake wracking my brain wondering where I could get a bra for my B5... - velosouljah 2009-01-07 12:31:28 (7 views) I have an extra trunk monkey, if anyone is interested. - Silver Streakin' 2009-01-07 12:17:34 (22 views) Send it after Mica. - Kris Hansen 2009-01-07 13:30:32 (2 views)
FS: <in classifieds> B5 A4/S4 OEM (ZAW 334 001) car cover, barely used. - quattronut 2009-01-07 11:41:42 (42 views)
FS: B5 A4 chassis OEM bra (Autobahn ZAW 193 015) in like new condition (box, paper work, etc). - quattronut 2009-01-07 11:35:13 (33 views)
ECU question - paulk571 2009-01-07 11:16:01 (30 views) No. pull your current ECU and get the same part number. try here: - Silver Streakin' 2009-01-07 11:38:13 (13 views) I think the '01s require a CH- or M-box - TwentyValveB5+S4 2009-01-07 11:34:48 (6 views) Correct! - jprice@CPS 2009-01-07 11:53:16 (0 views) no - nunya 2009-01-07 11:16:46 (8 views) Re: no - paulk571 2009-01-07 11:34:19 (13 views)
Does anyone know... - MtnA4Quattro 2009-01-07 11:00:07 (41 views) At least on a 12v, the difference is... - Jretal 2009-01-07 12:05:39 (12 views) well if thats the case then im SOL till I get paid... - MtnA4Quattro 2009-01-07 12:11:04 (7 views) Anyone know if this is the case for the 30v? - MtnA4Quattro 2009-01-07 12:37:57 (2 views) I know the AM is Manual and the AN is auto but can the AM be used in the auto as a temp? - MtnA4Quattro 2009-01-07 11:45:45 (2 views)
head lights - NFS1 2009-01-07 09:56:29 (44 views) have you replaced the bulbs? My 97 with new bulbs+foglights on worked very well. - tehaudi 2009-01-07 11:50:49 (1 view) How about silverstar bulbs? Mine made a difference. - DWP 2009-01-07 11:27:50 (6 views) no, these are the worst low beams ever - Silver Streakin' 2009-01-07 11:11:45 (43 views) Make sure they're aimed correctly. - Pscheoverdrive 2009-01-07 10:09:25 (17 views) you could get an HID kit for your current housings. Or upgrade to valeo ecodes - @wesome 2009-01-07 09:58:55 (21 views) HIDs - ScratchRob13 2009-01-07 09:57:54 (14 views)
Car is feeling a bit drifty on the highway over bumps, lighter steering left then right + clunking - RallyVermont 2009-01-07 09:51:11 (35 views) how old are your TREs... even if the boot isn't torn, it can still be bad. update to the S4 solids. - Silver Streakin' 2009-01-07 10:59:58 (3 views) check your tie rod ends too. - JAFO 2009-01-07 10:05:16 (2 views) My money is on sway bar links. I had the same symptoms, and that fixed it. - fastbreak88 2009-01-07 09:53:01 (4 views)
New surging and spark plug woes. - fastbreak88 2009-01-07 09:30:59 (28 views) Happened to me once. I was running really rich, fouled up my plugs and other issues. - Pscheoverdrive 2009-01-07 10:13:38 (12 views) do they look like this? - @wesome 2009-01-07 09:44:22 (29 views) omgz they look like mine! woot! - RallyVermont 2009-01-07 09:56:24 (9 views) what was yur problem? - @wesome 2009-01-07 09:56:45 (7 views) I haven't checked them since swapping in a new fron 02 sensor.. I'm guessing that was a leading caus - RallyVermont 2009-01-07 10:00:42 (8 views) i already swapped the front 02 with the motor build. - @wesome 2009-01-07 10:01:53 (12 views) hmm.. fueling? what are you running for injectors? - RallyVermont 2009-01-07 10:32:56 (2 views) Basically, yes they do. - fastbreak88 2009-01-07 09:50:34 (11 views) I'm guessing this because - @wesome 2009-01-07 09:55:22 (11 views) I have a new front o2 and n75 coming in the mail - fastbreak88 2009-01-07 10:32:54 (11 views) Well, w/my MAF, I never once threw a code. - Pscheoverdrive 2009-01-07 11:17:18 (5 views) Oh oh oh! Also, finishing up an intense golden eye and mario kart battle late monday night - fastbreak88 2009-01-07 10:42:26 (8 views)
How easy to transplant a 3 spoke steering wheel onto a column that currently has the 4 spoke wheel. - Jon-1.8t 2009-01-07 08:49:41 (32 views) Easy as pie. 12mm 12pt, takes a bit of torque. I used my impact gun. - Kris Hansen 2009-01-07 09:32:22 (6 views) good to know - Jon-1.8t 2009-01-07 09:59:28 (0 views) i'm sure if you just glared at that bolt it would come out for you =) - @wesome 2009-01-07 09:34:42 (3 views) "...U dirty bolt...." - ZB4rngs 2009-01-07 12:16:05 (0 views)
Man....still one of the best looking wheels Audi Ever Made...Bolero S6 10 spokes, $799 - Mr. Head 2009-01-07 04:47:21 (215 views) for sure. - slacker 2009-01-07 13:03:07 (3 views) Someone at my gf's office building has a mint URS4 with Bolero's - love it. - RallyVermont 2009-01-07 09:47:15 (9 views) Got to agree - Reggie 2009-01-07 09:18:38 (4 views) I agree 100% and hopefully they are still available when I get a chance to buy them. - myers1.8TQTips 2009-01-07 07:34:26 (7 views) those are nice - velosouljah 2009-01-07 07:01:24 (6 views) Agreed. - TighTT 2009-01-07 06:44:15 (7 views) Wah, I still miss my Pelican! Nice wheels BTW. - Pelican Pete 2009-01-07 05:07:41 (18 views) When did you sell your's pete? - Mr. Head 2009-01-07 05:19:11 (15 views) I don't remember exactly, but it was around May. - Pelican Pete 2009-01-07 11:23:36 (2 views)
bosch vs audi 710N diverter valve - Mumawalde 2009-01-06 21:02:06 (43 views) get the 710N from Joe @ AxisMotorsport.com - Silver Streakin' 2009-01-07 06:46:13 (15 views) 2nd - Jon-1.8t 2009-01-07 08:50:12 (4 views) 3rd - myers1.8TQTips 2009-01-07 09:32:07 (4 views) sigh... Quattro - RallyVermont 2009-01-07 09:51:58 (13 views) you can try www.genuineaudiparts.com - TwentyValveB5+S4 2009-01-06 22:38:33 (9 views)
Definitive B5 A4 Coolant/Antifreeze Use Thread - MrGoodbytes 2009-01-06 20:52:29 (105 views) old green - budpalumbo 2009-01-07 13:11:50 (3 views) There are more important questions in life... just use the G12 and water 50/50%. - Roger @ CapitalAudi 2009-01-07 08:27:04 (14 views) Bad advice to customers.Audi reformulated & back-speced closer to BMW & MB for a reason. - Audi Junkie 2009-01-07 10:41:19 (21 views) So why have dealers not switched in mass to the G12+? - Roger @ CapitalAudi 2009-01-07 11:28:31 (13 views) afaik, G-12 sold at dealers is old stock. You get what you ask for. Hopefully techs use G-12+ for TB - Audi Junkie 2009-01-07 11:48:59 (9 views) I think valvoline still makes G12 for Audi. - qfrog Ti20 2009-01-07 12:28:04 (7 views) I asked 2 dealers and they don't even know what G12+ is. - pac1085 2009-01-07 12:03:20 (12 views) ask them what G12++ is. - Silver Streakin' 2009-01-07 12:16:40 (6 views) I've been thinking about running G12+-+-.... or is that the same as G12? - Roger @ CapitalAudi 2009-01-07 12:36:53 (4 views) im running G12 +i - ModifiedA4 2009-01-07 13:26:53 (3 views) I'll check next time I stop by... - Roger @ CapitalAudi 2009-01-07 11:51:28 (3 views) de-ionized water i hope ;) - @wesome 2009-01-07 10:02:53 (11 views) I use G12 because that's what came with the car and I still have a full bottle and a 50:50 bottle. - Silver Streakin' 2009-01-07 06:42:57 (25 views) I use what is period correct and OEM. - AudiSport4000 2009-01-06 21:25:49 (75 views) yup, eggzachary - ModifiedA4 2009-01-07 09:54:19 (10 views) Concur. - 4Driver4 2009-01-07 03:52:51 (17 views) fwiw, my 1987 Coupe GT has had G-05 in it for the last 5 years. Zero issues.Can't do that w/oem G-11 - Audi Junkie 2009-01-06 21:47:37 (41 views) My experience with other coolants is limited - AudiSport4000 2009-01-07 13:22:41 (3 views) so g-05 or peak global are good for a 1.8t a4?.. im assuming a flush before the switch is needed? - qezel 2009-01-06 22:11:22 (20 views) PEAK calls for flush to obtain"lifetime"service.Moot, since waterpump swap requires fresh coolant to - Audi Junkie 2009-01-07 11:07:09 (12 views) Disappointed that AutoZone stopped carrying G-05 around here - pac1085 2009-01-06 21:49:58 (29 views) Same w/PepBoys. Since all makes coolants now carry MB specs, it's antiquated. - Audi Junkie 2009-01-06 21:59:47 (25 views) G-11 is the only incompatible one.G-05 has longest track record.G-12+ a waste of $,I use PEAK Global - Audi Junkie 2009-01-06 21:15:25 (54 views) G12+ - Audi recommended; never felt I needed to swap it for something different. It works - @wesome 2009-01-06 21:09:35 (34 views) G-12 had it's issues, so why be so shure G-12+ is like magic? What about people w/G-12 factory fill? - Audi Junkie 2009-01-06 21:16:57 (32 views) no clue; haven't felt a reason to change.... and no one has offered a real incentive to - @wesome 2009-01-06 21:25:45 (41 views) I think G-12+ is a definate hit. G-12 was a definate skip. Google: Dexcool problems - Audi Junkie 2009-01-06 21:40:01 (51 views) Cant wait to see the answers. Great post. - myers1.8TQTips 2009-01-06 20:54:26 (29 views)
need to replace heater core - gizmoa4 2009-01-06 20:40:27 (44 views) Autohaus AZ is where I purchased mine. Get the accumulator as well. - AudiMick 2009-01-06 21:07:52 (68 views) Isn't the accumulator is for the A/C. - ZB4rngs 2009-01-07 06:32:36 (8 views) Yes but you have to disconnect the AC when you do the core. - AudiMick 2009-01-07 08:07:38 (16 views) Gotcha. - ZB4rngs 2009-01-07 12:12:45 (3 views) Autohaus AZ is great - Skribbs2000 2009-01-06 23:04:55 (23 views) Re: Autohaus AZ is great - gizmoa4 2009-01-07 11:18:24 (3 views)
what type of fluid is best to be used for the automatic trans? - rob_chitown 2009-01-06 20:10:58 (18 views) Best = AMSoil ATF. - Audi Junkie 2009-01-06 21:26:57 (7 views) I put in VW/Audi ATF - myers1.8TQTips 2009-01-06 20:13:29 (13 views) I heard that Mobil 1 Syn ATF has been approved for use. - MrGoodbytes 2009-01-06 20:45:54 (12 views) But can you mix it w/ the fluid that's already in there (factory fill)? - mktbully 2009-01-07 09:41:04 (6 views) Type F is ancient, Dex III is old, anything else works and mixes fine.You should not have to top-off - Audi Junkie 2009-01-07 10:51:25 (0 views) Yarp. I went ahead with MaxLife ATF, it's full synth. So are others like MercV, ATF+4 and Dex VI. - Audi Junkie 2009-01-06 21:30:45 (16 views) It may have been, but I honestly have no idea. - myers1.8TQTips 2009-01-06 20:53:11 (10 views)
Attaching the transmission lines to the radiator....how? - stewarbd 2009-01-06 16:12:31 (34 views) lube the rubber on the nipple and push in straight without being crooked - BSK 2009-01-07 04:29:10 (6 views) a comment..... - 77'911 2009-01-06 17:49:23 (32 views) Wiggle and push. They don't go in easily. - 4Driver4 2009-01-06 16:16:49 (28 views) Exactly what he said ^^^ just need to play with them and work it in. - myers1.8TQTips 2009-01-06 17:38:28 (5 views)
Heated screen washer jets - CactusGreen 2009-01-06 14:40:55 (66 views) Re: Heated screen washer jets - CTMechE 2009-01-06 16:31:41 (95 views) Re: Heated screen washer jets - CactusGreen 2009-01-07 03:39:49 (17 views)
I found 104 octane at a gas station by work!! w00t. Time to make a new map. - nunya 2009-01-06 11:35:18 (45 views) It wound up being some 110 and the lady couldnt tell me the brand or really speak engrish... - nunya 2009-01-06 18:47:53 (28 views) Sure its 104? Is the anti-knock number 104? - TighTT 2009-01-06 11:51:48 (48 views) I need to run by there and figure out if its Sunoco 104 or VP street. Hopefully it is since they... - nunya 2009-01-06 12:00:37 (45 views) a couple Mobil stations in Phoenix AZ used to have race on pump and sell canisters in the store :) - RallyVermont 2009-01-06 12:06:06 (38 views) I live 3-4 miles from PIR. - BJC:: wokka wokka 2009-01-06 12:58:00 (32 views) Do'h I was thinking of Firebird Raceway.. The Mobil station was on Chandler blvd.. - RallyVermont 2009-01-07 09:45:35 (6 views) If its less than 104...its most likely unleaded. - TighTT 2009-01-06 12:04:16 (41 views) agreed. read the label. probably just 100. but, either way, nice find. hmm...I wonder what Sunoco GT - Silver Streakin' 2009-01-06 12:07:55 (44 views) Gee, that's "cheap", we use VP 110 for track, last time @ $11/gal - bhz1 2009-01-06 16:07:03 (13 views) LOL. - Kris Hansen 2009-01-06 13:09:18 (10 views) Cool, thanks for the info. I will check it out. - nunya 2009-01-06 12:07:20 (14 views) Wonder if they keep it filled in the winter - pac1085 2009-01-06 11:49:28 (36 views) A Sunoco near me has VP102 during the Summer.....and Kerosene in the Winter... - CTA4AVANT 2009-01-06 19:31:37 (10 views)
Starting from scratch... - cxg331 2009-01-06 10:55:36 (182 views) I'd buy the biggest brake kit on the market + ohlins coilovers. From there i'd chip (giac) + - @wesome 2009-01-06 19:06:51 (39 views) 99.5 1.8t, 5spd, GT28RS setup, custom turbo-back, ER FMIC, SB OFE SS + Unorthodox LWFW - TwentyValveB5+S4 2009-01-06 16:06:07 (50 views) DBC is so Passe unless going SEM...... - bassed 2009-01-06 16:24:51 (28 views) Still waiting for notification. Nobody's been told anything. - TwentyValveB5+S4 2009-01-06 17:12:08 (12 views) 2001 avant.. chip, custom exhaust, stasis track sprts, awe DTS, Upper strut tower mod, ... - Omega Supreme 2009-01-06 14:57:36 (33 views) i need the battery... - Mr. Mom 2009-01-06 18:08:06 (19 views) Upper struts on the 01'.5's are integrated, only major difference in 01' vs. 01.5' - bassed 2009-01-06 15:29:28 (19 views) I'd repeat what I've done all over again probably, I'm really happy. I have ME-7.5 a 2.0L and..... - bassed 2009-01-06 14:21:48 (35 views) Why do you have ME7.5? - BJC:: wokka wokka 2009-01-06 16:12:21 (16 views) None. I'd buy the 2.8 with sport suspension and leave it alone. - 4Driver4 2009-01-06 14:15:16 (16 views) i agree, unless you drive on a track with the car stock sport susp. is pretty good. - qpower 2009-01-07 06:26:25 (9 views) Go here - Nutch 2009-01-06 14:00:10 (35 views) Whoa, put an "Emo Warning" on that link! :-) - Roger @ CapitalAudi 2009-01-07 08:13:26 (8 views) 150HP is more than enough for me - Solaris 2009-01-06 13:44:32 (24 views) can I have the other 355 in your C6Z? - TwentyValveB5+S4 2009-01-06 16:03:59 (24 views) lol - Solaris 2009-01-06 16:21:02 (9 views) Mazda 3 for you then - northof49(+1+1) 2009-01-06 14:27:26 (12 views) My Civic is 140. Close enough - Solaris 2009-01-06 14:32:58 (13 views) this one works for me - Silver Streakin' 2009-01-06 12:32:24 (162 views) whoa. - ModifiedA4 2009-01-06 13:10:53 (16 views) looks like they turn a wrench too - Silver Streakin' 2009-01-06 13:20:13 (115 views) that dude gets all the chicks, at sebring, he had like three hoes around him at all times - Jon-1.8t 2009-01-06 15:06:01 (13 views) how'd i miss these? :( - ModifiedA4 2009-01-06 13:31:42 (15 views) Easy.... - TighTT 2009-01-06 12:02:03 (69 views) Which ME-7:)? It makes a difference. - bassed 2009-01-06 14:22:39 (13 views) Depends on what it's purpose would be. I've tried to wrap daily driver, track car, show car in one. - Roger @ CapitalAudi 2009-01-06 11:47:43 (57 views) Re: Think of it like this... - cxg331 2009-01-06 11:55:09 (56 views) chip, suspension, tires, brakes, done - RKA 2009-01-06 14:01:52 (23 views) So assuming you want a list of things to do to a daily driver only... - Roger @ CapitalAudi 2009-01-06 12:27:34 (37 views) tires. - nunya 2009-01-06 12:24:10 (20 views) Bilstein PSS9 coilovers and H-Sports front and rear sway bars - freakness 2009-01-06 11:47:14 (39 views) 710n, APR Chip, Bilstien H&R springs, H-Sports, BFG KDW-2, on 17" OZ SL,... - ScratchRob13 2009-01-06 11:00:30 (58 views) really though... Built 2.0 with a 30r and all supporting mods ;) - ScratchRob13 2009-01-06 11:01:20 (23 views)
Anyone get good Audi Related Xmas gifts? Mine: - ScratchRob13 2009-01-06 10:39:24 (257 views) Brother got me a set of these... - Jretal 2009-01-07 05:52:57 (38 views) sander for the 4000? I thought you just used a grinder ;) - Silver Streakin' 2009-01-07 11:15:18 (5 views) that's to make some room... - Jretal 2009-01-07 12:03:17 (3 views) I hope you sat down in the seat and PITB shortly after the wrapping hit the floor...... - bassed 2009-01-06 16:21:27 (32 views) LOL, nope but I got some socks. However, I got to see my wife and son smile - velosouljah 2009-01-06 13:44:55 (36 views) "Little late but oh well" SLAP who cares! =) - RallyVermont 2009-01-06 12:09:43 (39 views) will that radio fit in a B5? - Reggie 2009-01-06 11:32:38 (25 views) yup... crutchman has a faceplate and all the wiring to make it plug and play - ScratchRob13 2009-01-06 11:36:29 (43 views) TPIWWPGF.. - Kris Hansen 2009-01-06 11:07:51 (45 views) TPIWWPG - ScratchRob13 2009-01-06 11:41:39 (202 views) * senses Kris whipping out Photoshop to incease expose and brightness..* - RallyVermont 2009-01-06 12:08:05 (47 views) only Kris? - Silver Streakin' 2009-01-06 12:14:24 (38 views) No one can hurt Jesus! - RallyVermont 2009-01-06 12:19:36 (36 views) LOL troof! - ScratchRob13 2009-01-06 12:21:19 (32 views) "Excuse me while I whip this out" - Kris Hansen 2009-01-06 12:11:09 (32 views) :) - Reggie 2009-01-06 12:18:35 (149 views) "Man am I good" - Kris Hansen 2009-01-06 12:23:04 (54 views) She's cute!! =) - Kris Hansen 2009-01-06 12:05:05 (48 views) Right Click, Save As, Open's in Photoshop, Adjust Brightness... - jguthrie 2009-01-06 11:56:59 (47 views) 2nd - Haulin A..4 2009-01-06 11:16:47 (26 views) nope. I think this was the first year I didn't get anything Audi or track related. :( - Silver Streakin' 2009-01-06 10:44:56 (31 views)
Blew a hose on the way to class; thought I might as well figure out my misfire issue on #4 - @wesome 2009-01-06 10:18:49 (187 views) too much fuel! - Chicktronic 2009-01-06 13:45:38 (11 views) Try F6DTC's Joe has them. BRE7E's foul up really bad on me. - nunya 2009-01-06 10:37:45 (30 views) I think you mean BKR7E, which I've used for 5k with no issues. I've run ~7500 the last 2 sets. - Silver Streakin' 2009-01-06 10:41:40 (35 views) agreed...something else needs fixin. - RKA 2009-01-06 11:02:44 (16 views) This was on the old Mika tune with the 7e's so that was most likely the problem. either way... - nunya 2009-01-06 11:36:32 (30 views) great...love posts with incomplete info asking for advice - RKA 2009-01-06 12:02:04 (16 views) I am speaking from my own experience with both plugs not @wesome... - nunya 2009-01-06 12:06:07 (28 views) sorry, got confused - RKA 2009-01-06 13:46:24 (11 views) 2nd - ScratchRob13 2009-01-06 10:40:03 (14 views) How many miles on those plugs? - ScratchRob13 2009-01-06 10:35:25 (17 views) less than 1k - @wesome 2009-01-06 11:34:37 (12 views) Running too rich? You're spending money on seats, but it won't run right? - Kris Hansen 2009-01-06 10:28:32 (19 views) bought the seats awhile ago... - @wesome 2009-01-06 11:33:49 (16 views) That really is... - freakness 2009-01-06 10:23:20 (78 views) It is? - Kris Hansen 2009-01-06 10:28:47 (20 views)
DIY Timing Belt Instuctions - Cfrost 2009-01-06 08:43:37 (100 views) At the dealer, they have good instructions... - RKA 2009-01-06 17:41:43 (38 views) Yes - TristanP 2009-01-06 11:53:07 (81 views) Oh man. If you can't find the instructions... - Mica 2009-01-06 09:51:58 (23 views) Yeah..I found some in the resources link also. = ) - ZB4rngs 2009-01-06 09:11:00 (13 views) seriously? - myers1.8TQTips 2009-01-06 09:10:21 (10 views) you->resources link at top of page->tech articles->engine - ModifiedA4 2009-01-06 08:46:55 (14 views) ... really? - kenny (dremel) 2009-01-06 08:46:32 (11 views)
Parts car anyone? - Jesse623 2009-01-06 08:16:50 (85 views) E-mail me. - Joey T 2009-01-06 10:55:46 (25 views) Where are you exactly? - ScratchRob13 2009-01-06 10:02:09 (8 views) Dalton, MA - Jesse623 2009-01-06 10:22:08 (8 views) I'll take it off your hands, will even come get it - Jon-1.8t 2009-01-06 08:51:19 (14 views) Get the codes first. - kenny (dremel) 2009-01-06 08:29:56 (38 views) I agree - Jesse623 2009-01-06 09:30:23 (28 views)
Disabling headlight washers - driveslikegranny 2009-01-06 07:46:34 (159 views) mine did it naturally...i think the pump is done. - mktbully 2009-01-06 14:18:02 (12 views) Any way to get the dash indicator to go off? (same prob) - eehokie 2009-01-06 16:42:41 (12 views) Mine too. I can only fill the tank halfway, 'cause it leaks out. - CTMechE 2009-01-06 16:33:51 (10 views) unplug hose behind washer pump at the bumper and plug the hose - ianbis 2009-01-06 11:51:29 (8 views) So if you were to put ..... - ZB4rngs 2009-01-06 08:09:56 (54 views) I didn't think of that but yeah, it should work. - driveslikegranny 2009-01-06 08:37:00 (13 views) :Note: they can be adjusted so they don't stick in the up position. LOL.... - velosouljah 2009-01-06 07:50:13 (24 views) But I still don't want them activated when moving at highway speed. - driveslikegranny 2009-01-06 08:22:52 (18 views) It would be funny to squirt people though = ) - ZB4rngs 2009-01-06 09:06:29 (8 views) Re: :Note: they can be adjusted so they don't stick in the up position. LOL.... - ZB4rngs 2009-01-06 08:11:55 (35 views) you could just unplug the pump too... - pac1085 2009-01-06 07:48:30 (22 views) better yet, remove the pump and seal the hole - 4Rings::resurrected 2009-01-06 08:34:45 (12 views) but I would have to somehow seal up the electrical connectors to the pump - driveslikegranny 2009-01-06 08:25:02 (19 views) No, you wouldn't have, not really. You just PERMANENTLY disconnected your pump. - MrGoodbytes 2009-01-06 19:03:35 (8 views) seal up the electrical connectors to the pump with electric tape if you're concerned - B5Davem 2009-01-06 11:57:18 (16 views) ^^^ This is what I did. Took 2 minutes. - MrGoodbytes 2009-01-06 07:58:32 (20 views)
Alignment problems... - TimO'Brien 2009-01-06 06:10:35 (35 views) most roads have a crown in them for water runoff. hence why cars pull to the right. - Silver Streakin' 2009-01-06 10:09:06 (15 views) First check tire pressures - Joey T 2009-01-06 06:45:48 (22 views)
'99 2.8Q Cam Seal troubles....Should changing it be this difficult? - MyDogDuster 2009-01-05 20:57:10 (162 views) Here are two ways to do it... - Catamount90 2009-01-06 05:37:41 (96 views) I used the wood screw technique....worked like a champ! Thanks! - MyDogDuster 2009-01-06 20:54:03 (6 views) did you use the factory tool for the seal installation? - ModifiedA4 2009-01-07 09:53:08 (4 views) yes I did, as it came with the took kit I rented. that worked fine. - MyDogDuster 2009-01-07 12:58:11 (3 views) cool...thanks. - ModifiedA4 2009-01-07 13:14:48 (0 views) Here's another.. - Kris Hansen 2009-01-06 06:18:20 (116 views) nice drill bit pin. lol. - ModifiedA4 2009-01-06 08:17:08 (14 views) Thanks! I was using a rivet, but, the only ones I had were aluminum, and they were bending.. - Kris Hansen 2009-01-06 08:18:23 (23 views) I like your way better. Looks like it's easier to get a grip and pull on. - Resident Curmudgeon 2009-01-06 06:30:02 (16 views) Thats because his way is the right way! - Catamount90 2009-01-06 06:54:31 (15 views) Well, not really, that's a homemade solution.. =) - Kris Hansen 2009-01-06 07:06:13 (17 views) O RLY? Details on how you made it please. - Catamount90 2009-01-06 07:19:21 (13 views) It's a flat piece of steel, with holes, and 2 wood screws. Pretty simple =D - Kris Hansen 2009-01-06 07:20:56 (13 views) Oh thats far less complex than I thought. - Catamount90 2009-01-06 08:12:06 (11 views) You don't grip or pull, you turn the screws, which pulls the seal out. - Kris Hansen 2009-01-06 06:43:15 (13 views) My suggestion would be to do all the seals, which would make your job way easier. - 4Driver4 2009-01-06 05:04:04 (36 views) a comment..... - 77'911 2009-01-05 21:38:46 (110 views) seal installation kit..... - 77'911 2009-01-05 22:14:58 (94 views) I have Tool 3241, but it's just not grabbing it - MyDogDuster 2009-01-06 05:44:14 (29 views) a response.... - 77'911 2009-01-06 17:58:51 (11 views) CAREFULLY run in two wood screws, pull seal out. - MrGoodbytes 2009-01-05 20:59:17 (31 views)
Pretty nasty... TT Hill climb car powered by V8 TT... - Roger @ CapitalAudi 2009-01-05 20:37:19 (174 views) That's as much a TT as Jimmie Johnson's car is an Impala. - Kris Hansen 2009-01-06 06:45:45 (12 views) wow, looks like fun! - Steve_Ag Arrow 2009-01-06 06:18:46 (11 views) Talk about blowing a lot of money out of your a$$ . . . - freakness 2009-01-05 21:27:30 (48 views) That is pretty nasty - myers1.8TQTips 2009-01-05 21:26:56 (16 views) looks like a go-cart....or a camera trick picture of a nitro car....=) - Mr. Head 2009-01-05 21:24:02 (16 views) thats one narrow course - B5Davem 2009-01-05 20:41:48 (16 views)
Mixing fuel grades - cparke 2009-01-05 19:49:40 (90 views) Just run 89, srsly. - Audi Junkie 2009-01-06 08:57:19 (17 views) Couldn't I get pre-detonation problems in the engine? - cparke 2009-01-06 09:06:26 (12 views) No, ECU won't allow it. Stock in North America can run on 87, regardless of placard.Chip w/89's fine - Audi Junkie 2009-01-06 10:17:34 (10 views) What's that save you... a dollar? dollar fifty? - kenny (dremel) 2009-01-06 06:27:42 (13 views) agreed. not worth it, especially now that gas is <$2. better driving habits can save more $ - Silver Streakin' 2009-01-06 10:29:03 (14 views) 93 premium is still >$2 here, but the other grades are under $2 so that's the problem here - cparke 2009-01-06 11:37:54 (8 views) A free lunch? - cparke 2009-01-06 06:50:02 (16 views) What in the world can a person eat for $ 1.50 ? - freakness 2009-01-06 08:20:08 (20 views) I'm sure Dunkin Donuts can do it - cparke 2009-01-06 09:07:19 (10 views) Bingo... - freakness 2009-01-06 15:53:44 (9 views) Yup - DWP 2009-01-05 21:25:34 (16 views) Actually, can even do a mix of 2gal 87 and 4gal 93 to get a 91 mix - cparke 2009-01-06 09:14:49 (19 views)
01 1.8TM turbo lag question 1st vs. 2nd gear - need_TQM 2009-01-05 19:05:04 (56 views) i wouldn't think a k03 would have trouble fully spooling in first but.. - qezel 2009-01-05 19:58:12 (34 views)
Tips for installing the AWE DTS? - natrix 2009-01-05 18:16:19 (56 views) no need for Loctite. and, the smaller bolts really are just 20-25 ft-lbs. - Silver Streakin' 2009-01-06 10:46:57 (4 views) Re: Tips for installing the AWE DTS? - pac1085 2009-01-05 18:17:59 (57 views) Everything went well. It was a piece of cake to install, done in less than 2 hours. - natrix 2009-01-06 22:00:24 (5 views)
While I was fixing oil pan, I noticed these two pipes damaged from the bump, what are they? - Lifesgood 2009-01-05 18:11:06 (186 views) another pic....I have a manual so it can't be auto trans cooler - Lifesgood 2009-01-05 18:42:16 (65 views) AC lines. Keep an eye on them - if they "go" you'll know but it won't leave you stranded. - Roving DungBeetle 2009-01-05 19:36:07 (15 views) EDIT: One anyway looks pretty ground down.... may want to check it better. They are high pressure: - Roving DungBeetle 2009-01-05 19:38:09 (29 views) auto trans cooler lines - Aarononymous 2009-01-05 18:28:06 (19 views) 2nd. Get them fixed ASAP, before your trans pumps all of it's fluid out.. - Kris Hansen 2009-01-05 18:40:46 (14 views) he's got a manual - pac1085 2009-01-05 18:40:46 (82 views) yeah, it seems like it may be AC lines. Guess my next investment is a skid plate.... - Lifesgood 2009-01-05 18:45:31 (26 views) skid plates are for off roading. - Reggie 2009-01-05 18:47:48 (35 views) Well, I guess its called a belly plate? My car is lowered....never saw the bump and smack! - Lifesgood 2009-01-05 18:50:52 (29 views) Panzer plate - pac1085 2009-01-05 18:52:08 (39 views) Yeah, I saw that in the last response. They are awesome and reasonable too! Worth the investment! - Lifesgood 2009-01-05 19:04:14 (14 views) I've heard good things about them - Reggie 2009-01-05 19:00:30 (16 views) hard to tell from pic but looks like air conditioning lines - pac1085 2009-01-05 18:18:51 (16 views)
Fixed Oil Pan finally.....here are the results - Lifesgood 2009-01-05 17:51:08 (151 views) excellent. - ChooChooNongNongHead 2009-01-05 18:55:59 (15 views) now, go get a panzer plate so it does not happen again. - ski ya later 2009-01-05 17:55:26 (41 views)
Adjustable Control arms all back in stock! - MikekiM@PureMS 2009-01-05 17:29:25 (80 views) I am just ignant, but what are the benefits for adjustable control arms?? - Omega Supreme 2009-01-06 09:30:35 (9 views) You can adjust camber independently. - MikekiM@PureMS 2009-01-06 09:38:33 (15 views) Oh!!! Nice. Thank you for the info. - Omega Supreme 2009-01-06 09:41:56 (5 views)
Anyone need a Fiber Images vented hood... there's one ending shortly... - Roger @ CapitalAudi 2009-01-05 16:48:12 (188 views) I want:) - bassed 2009-01-05 17:11:40 (23 views) Here's a linky.... - Roger @ CapitalAudi 2009-01-05 17:17:41 (88 views) WTF is the function of the NACA ducts? - MrGoodbytes 2009-01-05 20:00:26 (25 views) Developed by NASA for jets & rockets... - über güber 2009-01-06 05:41:48 (19 views) Too balance out the look, to provide air inlet on dual intake cars like the S4 could be... - Roger @ CapitalAudi 2009-01-05 20:27:05 (53 views) Looks like he doens't use hood pins, my last CF experience left me with a broken windshield(:.... - bassed 2009-01-05 17:21:28 (40 views) Those vents should help with upward suction... But I would still pin it... - Roger @ CapitalAudi 2009-01-05 17:32:16 (15 views)
Ugg Time for Rear Wheel Bearing Replacement - JPQuattro 2009-01-05 13:09:39 (68 views) or, what I did, pull the upright and take it to a shop with a press. take a pic of your alignment. - Silver Streakin' 2009-01-05 13:43:40 (63 views) 2nd - kenny (dremel) 2009-01-05 13:56:24 (13 views) a comment..... - 77'911 2009-01-05 13:39:47 (136 views) how much was that? where from? - ski ya later 2009-01-05 15:24:47 (16 views) a response..... - 77'911 2009-01-05 15:46:16 (88 views) Wow,, that would be a really nice tool addition. - Omega Supreme 2009-01-05 17:15:23 (13 views) a comment... - 77'911 2009-01-05 19:56:10 (43 views) Thanks to you I bought that tool. And I must say, Very nice. - shawfm 2009-01-05 14:28:38 (22 views) a response.... - 77'911 2009-01-05 16:00:47 (34 views) Thanks guys - JPQuattro 2009-01-05 14:23:15 (28 views)
Unitronics stage 1+ chip question - ZB4rngs 2009-01-05 12:41:18 (40 views) I think it will detard timing - ScratchRob13 2009-01-05 15:23:04 (8 views)
Brake Disc and Pad problem - Daniel Grant 2009-01-05 12:14:21 (47 views) Some pads are pretty aggressive when cold. What kind do you have? And what means "quickly"? - DWP 2009-01-05 12:30:11 (14 views) Re: Not sure what kind of pads are on there - Daniel Grant 2009-01-05 12:35:44 (19 views) It's normal for this to happen - there is no pad contact there - Reggie 2009-01-05 12:48:59 (16 views) What are the chances they replaced just the pads and not the rotors before selling the car to you? - über güber 2009-01-05 12:34:00 (15 views) do the A8 upgrade while you are at it. - tehaudi 2009-01-05 12:50:25 (12 views) Re: do the A8 upgrade while you are at it. - Daniel Grant 2009-01-05 13:01:03 (17 views) You can buy a A8 rotor and the caliper brackets for the Audi TT - Reggie 2009-01-05 13:19:47 (30 views) Re: Gotta do it on a budget .. suggestions for the Discs and the pads? - Daniel Grant 2009-01-05 12:36:47 (8 views) PBR pads & Myle or OP parts rotors - über güber 2009-01-05 12:47:41 (17 views)
1999 B5 1.8T Front End Height? - UBERNOOB 2009-01-05 12:02:14 (26 views) Did you buy 2.8 springs? - Joey T 2009-01-05 13:27:31 (16 views) ECS tuning sells adjustable spring perch.. give them a call. - über güber 2009-01-05 12:29:29 (14 views)
There might be a Philly area B5 A4 photo shoot going down if anyone wants in..... - bassed 2009-01-05 10:12:11 (117 views) with fugly winter wheels? wait until spring. - Silver Streakin' 2009-01-06 10:48:43 (11 views) My winter wheels are not fugly, infact they are the same as in your siggy:) - bassed 2009-01-06 11:44:22 (7 views) I may make those my winters too. now that my OZ SLs are the track wheels...with RA1s. - Silver Streakin' 2009-01-06 12:35:20 (7 views) more details please............ - Audi4orce 2009-01-05 16:50:08 (11 views) It's all up in the air, thus far but interest has peaked and a bunch of Vortex B5 guys are in..... - bassed 2009-01-05 16:58:20 (18 views) think you could make a bit of a drive over here?... it'd only take a day or two =) - @wesome 2009-01-05 11:47:13 (12 views) On mah way:) - bassed 2009-01-05 16:56:24 (6 views) Too bad my engine build won't be done yet. Make it later in the month and I could make it. - AvantQuattro 2009-01-05 11:43:37 (11 views) I have a feeling there will be more in the future than there have been in the past, no worries. - bassed 2009-01-05 16:57:23 (6 views) Car's not really in any shape yet for a photoshoot... later in the spring would be fun though... - Roger @ CapitalAudi 2009-01-05 10:36:34 (21 views) Meh, stop being such a perfectionest nothing is ever perfect:) - bassed 2009-01-05 16:56:52 (10 views) But there are a bunch of changes all mid project in the workshop right now :-) - Roger @ CapitalAudi 2009-01-05 17:39:41 (8 views)
Coolant Temp - Mumawalde 2009-01-05 09:23:16 (94 views) Probably t-stat, but you can check double-check the temp. sensor with the HVAC - cparke 2009-01-05 10:05:37 (27 views) Yup... It is '49'. - Mica 2009-01-05 10:19:39 (20 views) Broken thermostat. Same thing happened to me. Seems like it happens a lot. - Mica 2009-01-05 09:37:23 (23 views) Normal, seen it a lot, myself included. T-stat is bad. Replace it and it will go away. - Resident Curmudgeon 2009-01-05 09:24:56 (20 views) The t-stat that came in my timing belt kit also crapped out on me. - über güber 2009-01-05 09:46:54 (33 views) broken thermostat (stuck open) - pac1085 2009-01-05 09:24:52 (42 views) From my old 95' Audi 90 - Reggie 2009-01-05 11:49:34 (72 views) You found a Rolex in your coolant!? - über güber 2009-01-05 12:14:37 (23 views) ....doh! - über güber 2009-01-05 12:14:54 (14 views) fake Rolex - Reggie 2009-01-05 12:46:21 (30 views) I just replaced the termo, used vacuum pump to clear air - Mumawalde 2009-01-05 09:26:28 (23 views) did you install the t-stat in the correct position? - pac1085 2009-01-05 09:27:21 (37 views) LoL... yeah if for example you put it on backwards, that won't help matters. - über güber 2009-01-05 09:31:30 (16 views) Stant? Or OEM? - 4Driver4 2009-01-05 09:27:06 (13 views) stant - Mumawalde 2009-01-05 09:27:27 (17 views) Junk right out of the box. Replace. BTDT. - 4Driver4 2009-01-05 09:53:10 (17 views) You can remove it and put it into a pot of boiling water to see if it opens. - über güber 2009-01-05 09:32:59 (35 views) It's opening... - BJC:: wokka wokka 2009-01-05 12:13:47 (13 views) wokka wokka.... - über güber 2009-01-05 12:23:47 (10 views) Or, the spring is broken and it will be obvious right away. - Mica 2009-01-05 09:37:54 (20 views) does the coolant used have any affect? - Mumawalde 2009-01-05 10:32:42 (25 views) Yes... kinda. If you mixed coolants it will cause them to gel up and could clog things. - über güber 2009-01-05 11:07:36 (18 views) What, green coolant? No, I switched to that after my TB change. It's great, cheap, and easy to find. - Resident Curmudgeon 2009-01-05 10:59:30 (19 views) Orange (dex-cool) supposed to use pentosin I guess (g11) - Mumawalde 2009-01-05 11:04:22 (29 views) Well, that depends on what engine and model year you have. - Resident Curmudgeon 2009-01-05 11:06:28 (24 views) 2001 1.8T - Mumawalde 2009-01-05 11:07:20 (12 views) 2001 is G12, pink factory. - Resident Curmudgeon 2009-01-05 11:26:22 (10 views) Stick with OE or Pentosin G12 or newer G12+ (purple stuff) - über güber 2009-01-05 11:13:01 (14 views) Okay, so the definitive answer is OEM G12 is correct, but Dex-cool is okay too? - cparke 2009-01-05 19:51:52 (10 views) g12+ is pink and you can't really get it anymore - pac1085 2009-01-05 11:19:21 (28 views) Dude that's crazy talk. I've never heard of G12++. And you can always order G12. - über güber 2009-01-05 12:18:59 (15 views) Here you go... - pac1085 2009-01-05 12:42:13 (56 views) interesting info. I'll wait for the cliffnotes and continue to use G12 - Silver Streakin' 2009-01-06 10:38:37 (8 views) I stand corrected. So the G12++ is purple right? - über güber 2009-01-05 13:10:25 (12 views) it's all pink, people just called it purple because of the cap on the bottle. - pac1085 2009-01-05 13:17:16 (21 views) the stuff's expensive too... - Mumawalde 2009-01-05 11:20:50 (19 views) you only need 1 gallon of G12. - pac1085 2009-01-05 11:21:50 (22 views)
Rear end roaring - brakes? - e40 2009-01-05 09:11:20 (34 views) Sounds like the wheel bearings again - pac1085 2009-01-05 09:16:07 (32 views) No changes in sound when I swerve / change the load on the rears. Nice Santorin's in teh sig :) - e40 2009-01-05 09:24:54 (16 views) Each time my bearings have gone there hasn't been any change in - jguthrie 2009-01-05 09:56:29 (21 views) I heard about the crappy Optimol bearings. I don't think I have those. Unless that's what ECS sells - e40 2009-01-05 10:38:24 (7 views) hmm, maybe like 4driver4 said - check rear diff fluid? btw, the right one isnt santorin :P - pac1085 2009-01-05 09:32:20 (11 views) I was worried about that. I have enough OEM fluid to do the job, but I couldn't get the - e40 2009-01-05 09:37:09 (27 views) yep...I had to pay a shop $100 to remove mine :( - pac1085 2009-01-05 09:40:30 (11 views) Rear diff? I'm not sure how it could be brakes. - 4Driver4 2009-01-05 09:15:54 (11 views)
Anyone have Jeff Moss's current email addy? - fastbreak88 2009-01-05 08:59:01 (23 views) moss@torque-factory.com - DWP 2009-01-05 12:25:04 (9 views)
Audi A4 B5 - LED/Xenon kit demonstration - Tumbo 2009-01-05 02:52:23 (344 views) where do you find those? - nickelmedia 2009-01-05 09:53:52 (20 views) ebay, 300 bucks shipped - pac1085 2009-01-05 13:06:13 (20 views) wru ebay cashback - kenny (dremel) 2009-01-05 16:03:38 (15 views) i really like those, i just wish the back of them wasn't such a mess of wires - pac1085 2009-01-05 07:00:26 (57 views) yeah i like the LED look... just wish it were straight across but still very nice - beejohn 2009-01-05 06:49:40 (17 views) I would have to say that is the best looking Aftermarket headlamp i've ever seen... - Mr. Head 2009-01-05 03:42:10 (81 views) agree. - slacker 2009-01-05 06:51:51 (13 views)
Here is the TB I scored for MtnA4Quattro's car (His car is a 1999 AHA 30V Tip) - velosouljah 2009-01-05 00:32:17 (102 views) 078-133-063-AM is for a manual. - qfrog Ti20 2009-01-05 12:47:15 (20 views) Re: 078-133-063-AM is for a manual. - MtnA4Quattro 2009-01-07 11:44:35 (1 view)
Hard to find out where this leaks are coming from.... - Fremder 2009-01-05 00:21:22 (161 views) on my 96 2.8 the crank position sensor o ring was leaking, might want to check that - northof49(+1+1) 2009-01-05 09:40:48 (12 views) Valley pan gasket? I had a decent leak from those on my old Audi 90 V6's... - Roger @ CapitalAudi 2009-01-05 09:31:38 (12 views) What is Valley pan gasket? - Fremder 2009-01-05 12:30:28 (10 views) The valley between the 2 heads... under the intake manifold... common on higher mileage Audi's. - Roger @ CapitalAudi 2009-01-05 14:58:52 (8 views) First, you need to get everything cleaned. Hard to tell what's old and what's new. - CO2.8 2009-01-05 07:02:01 (60 views) That's exactly what I didn't replace.. - Fremder 2009-01-05 09:24:39 (21 views) I don't think many of us think about the S-tube. - CO2.8 2009-01-05 09:34:02 (23 views) Do you know the part number of S-tube? - Fremder 2009-01-05 12:32:50 (11 views) Believe I used: Audi 078103223B VENTHOSE - CO2.8 2009-01-06 06:31:31 (9 views)
Oil Pan leak...HELP! - Lifesgood 2009-01-04 18:00:29 (78 views) good luck! ... I replaced mine recently. FYI you don't need to drop the subframe :) - @wesome 2009-01-04 21:44:09 (47 views) Ha, Believe me, I know it is a pain in the a job. I am going to try the quicksteel tomorrow... - Lifesgood** 2009-01-05 00:08:43 (31 views) Do not attempt to weld, do not pass Go and collect $200... Just use the JB Weld directions I posted - Roger @ CapitalAudi 2009-01-05 17:49:50 (10 views) I wonder if you could take it to a welder to see what they could do? Might be worth it. - über güber 2009-01-05 12:35:06 (7 views) I once did a temporary/permanent fix to a cracked oil pan by draining the oil pan like you did... - Roger @ CapitalAudi 2009-01-04 19:13:54 (44 views) Drain the oil completely then JB weld it or fix it right. - nunya 2009-01-04 18:03:29 (25 views) I'd / I have used quick steel. Doesn't have the curing time that JB has. Mush it in a ball - ChooChooNongNongHead 2009-01-04 18:33:26 (81 views) think I can use QuickSteel on top of the JB Weld? Or do I scrape it off and start from scratch? - Lifesgood 2009-01-04 18:52:03 (19 views) originally I was going to use JB Weld but got lazy... - ChooChooNongNongHead 2009-01-05 03:02:43 (48 views) oh yeah, I didn't remove the pan when I used it. I was intending on it (if I used JB weld) - ChooChooNongNongHead 2009-01-04 18:36:36 (28 views) I did drain the oil completely, but how do i remove the rest of the oil that could still be there? - Lifesgood 2009-01-04 18:08:24 (31 views) Use something like this: - nunya 2009-01-04 18:20:53 (80 views)
Adam/TighTT in PVW H20 coverage...... ohhhhh.... - bassed 2009-01-04 17:10:06 (249 views) congrats Adam! though... he wasn't rolling on those wheels at H20? so I thought? - RallyVermont 2009-01-05 06:15:06 (10 views) Sure was. =) - TighTT 2009-01-05 07:15:22 (12 views) lol really? Must have been the heat.. I thought they were painted differently then! - RallyVermont 2009-01-05 07:39:08 (18 views) I like the stash at the bottom ;) - ScratchRob13 2009-01-04 18:18:09 (17 views) I miss going to these meets.... It makes me want to move back more north. - nunya 2009-01-04 18:01:49 (33 views)
Timing belt change almost done, but one problem... - stewarbd 2009-01-04 17:09:48 (140 views) i remember doing my AEB with the updated tensioner... - Audi4orce 2009-01-04 19:31:09 (60 views) Call it quits, and take it to a mechanic...it'll save you money down the road. - Busted_A4 2009-01-04 19:08:47 (48 views) did you count teeth on the belt? a little late now, but - kenny (dremel) 2009-01-04 17:48:55 (56 views) ...as long as the old one is on right... ;-) - 4Driver4 2009-01-04 17:57:52 (25 views) it's not going to move it that far, you're slightly advanced, right? It'll pull it back slightly.. - Aarononymous 2009-01-04 17:33:25 (23 views) Best thing to do> - alms_lefko 2009-01-04 17:21:45 (83 views)
A4 Wheels Offset Question: Jetta GLI 17x7 54mm Offset...Will they work? - JHolmes105 2009-01-04 15:36:08 (33 views) I believe they will work but they will look odd - qfrog Ti20 2009-01-04 17:11:19 (22 views) Re: I believe they will work but they will look odd - JHolmes105 2009-01-07 13:57:00 (0 views) What year GLI? MKIV was 5x100 - Mica 2009-01-04 16:22:49 (8 views) Agreed. AFAIK A4 is a 5X112 bolt pattern and Jetta is 5X100??? Unpossible. - über güber 2009-01-05 09:37:06 (10 views) I believe MKVs are 5x112 Jetta and Golf/GTI - Senna4Life 2009-01-06 05:20:00 (5 views) yes spacers needed - JAFO 2009-01-04 15:42:55 (10 views) Re: yes spacers needed - JHolmes105 2009-01-04 15:48:16 (18 views) at least 10mm. .... - JAFO 2009-01-04 16:33:05 (18 views)
Things I need to have done by tonight: - @wesome 2009-01-04 15:13:58 (135 views) Finished... - @wesome 2009-01-04 20:49:23 (52 views) You used a BFH for the sensor right : P - BJC:: wokka wokka 2009-01-05 12:15:41 (11 views) props, I would VAG it - Skribbs2000 2009-01-04 21:19:22 (29 views) yeah... my negative is off often =) i'm an expert clock programmer i swear. - @wesome 2009-01-04 21:38:04 (17 views) just curious what are you going to do on the front side mount of the rear diff? - velosouljah 2009-01-04 18:16:10 (24 views) just got back to victoria yesterday. Parts will be sent out asap - @wesome 2009-01-04 20:41:07 (22 views) Sounds like a winnar. I've been eyeing that AWE DTS and might just have to get one soon too =) - velosouljah 2009-01-04 22:09:22 (11 views) done yet? - Casablanca Avant 2009-01-04 16:24:50 (15 views) good luck.. but youre pushing it with the door handle - Skribbs2000 2009-01-04 15:30:12 (38 views)