AEB head - cam bearings
#1
AudiWorld Senior Member
Thread Starter
AEB head - cam bearings
Motor (200k miles) of my 1999 AEB had low oil pressure at idle. New oil pump, pickup, filter, etc.
Still quite low.
No knock or otherwise.
I read somewhere that the cause of low oil pressure on the AEB can also be coming from the heads?
Took the heads off, cams out.
Photos of the cam bearing seats below.
Can they be the cause of low oil pressure?
Is the head 'done'?
Can it be rebuild?
More photos here:
AEB Head Cam Bearings Photos by KraftwerkTurbo | Photobucket
Still quite low.
No knock or otherwise.
I read somewhere that the cause of low oil pressure on the AEB can also be coming from the heads?
Took the heads off, cams out.
Photos of the cam bearing seats below.
Can they be the cause of low oil pressure?
Is the head 'done'?
Can it be rebuild?
More photos here:
AEB Head Cam Bearings Photos by KraftwerkTurbo | Photobucket
Thread
Thread Starter
Forum
Replies
Last Post
uble1234
A6 / S6 (C6 Platform) Discussion
14
10-23-2020 08:07 PM
random512
A6 (C7 Platform) Discussion
27
04-15-2019 10:45 AM
bballfreak
A6 / S6 (C6 Platform) Discussion
9
04-14-2019 06:59 PM