is the evoms intake CARB legal? anyone have the sticker for it?
03-01-2009, 04:41 PM
#5
Its a snug fit, and you certainly couldn't fit larger than vr6/tt225..
I bought my car w/ cone filter setup, previous owner said the same thing, MAF housing won't fit. A little creativity, a few different size couplers and clamps, and all works.
<img src="http://pictureposter.audiworld.com/91268/img_0150.jpg">
<img src="http://pictureposter.audiworld.com/91268/img_0150.jpg">
03-02-2009, 08:02 AM
#7
Too much variation in depth.. Can you not clearly see what was done though??
I think its clear enough to illustrate the point that it fits in there don't you??
And beyond that you can see a smaller, hard plastic piece was used to join the TIP and the other silicone piece, which is clamped around the MAF housing (which protrudes through the enlarged opening). Please let me know what if anything needs clarification!
In the meantime, please show us your picture of the same setup. :-}
And beyond that you can see a smaller, hard plastic piece was used to join the TIP and the other silicone piece, which is clamped around the MAF housing (which protrudes through the enlarged opening). Please let me know what if anything needs clarification!
In the meantime, please show us your picture of the same setup. :-}
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
VelocityS4
S4 / RS4 (B5 Platform) Discussion
10
08-04-2006 10:09 PM
Audi baby yea!
A4 (B5 Platform) Discussion
8
01-05-2003 09:40 PM
