sdfigurski

So I was driving down the road and then I took a turn shifted gears and the rmps just dropped no obscure noises or smells. I pushed it off the road where i tried to jump it and it cranked but wouldn't turn over. the lights didn't dim thats why i don't think its the alternator or battery. I scaned the ecu and it came up with: HTD catalyst n/a, a/c refrid mon n/a, EGR/VVT sys mon n/a. when trying to start it when i pressed the gas pedal didn't sound like anything was happening.

I was wondering if anyone els had these problems, how they fixed them, any suggestions?

thanks

lyleswk

Did you scan with a VAGCOM reader?

sdfigurski

I used a OBD 2 and CAN scan tool

Pothole5000

What error code did it give, that definition sounds like gibberish from a cheap scan tool.

lyleswk

And adding to pothole, it won't tell you the Audi specific code that would aim you closer to the issue.

sdfigurski

yeah it was some ****y autozone loan a tool one very generic i ordered a vs 450 vag can scanner. So when that comes in I will update you guys with what it says.

sdfigurski

so i got an error code of g65 which is the ac high pressure sensor: sporadic signal to low. also it said sensor for oil level/temp:static open/short