:: ECS Tuning :: NEW!! B8 A4 ECS Street Shield Aluminum Skid Plate
#1
Audiworld Basic Sponsor
Thread Starter
:: ECS Tuning :: NEW!! B8 A4 ECS Street Shield Aluminum Skid Plate
The belly pans fitted to modern Audis have always appeared to be under-engineered, out of place, cost-cutting parts. Many enthusiasts have chosen to run their cars without the protective cover entirely. This decision, however, ignores the unfortunate reality that the belly pan protects several critical engine & drivetrain components.
ECS has a much more sensible solution – The Street Shield Skid Plate features corrosion resistant, 4mm thick 5052 aluminum, with included steel hardware, offering complete engine undercarriage protection weighing in at only 11.5 lbs.
Protect Your Vitals
Click HERE to order or for more information
Fits:
Audi B8 A4 (2009+)
Let me know if you have any questions.
Jason
#3
Audiworld Basic Sponsor
Thread Starter
#4
I installed this plate this weekend. It went in fairly easily. Would be nice to get the page with the expander/crimper instructions in the packaging. I found it on the product page after starting the install. Not a big deal.
And the plastic half turn screws that go on the wings are not that great. I couldn't get them to stay secured. Ended up getting some 1/4-20 bolts and washers to tighten them down. I'd recommend looking into different hardware to secure the wings to the fender liners.
#5
Audiworld Basic Sponsor
Thread Starter
I installed this plate this weekend. It went in fairly easily. Would be nice to get the page with the expander/crimper instructions in the packaging. I found it on the product page after starting the install. Not a big deal.
And the plastic half turn screws that go on the wings are not that great. I couldn't get them to stay secured. Ended up getting some 1/4-20 bolts and washers to tighten them down. I'd recommend looking into different hardware to secure the wings to the fender liners.
And the plastic half turn screws that go on the wings are not that great. I couldn't get them to stay secured. Ended up getting some 1/4-20 bolts and washers to tighten them down. I'd recommend looking into different hardware to secure the wings to the fender liners.
Jason
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning-Audi
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
0
04-21-2015 11:26 AM
ECS Tuning-Audi
A4 (B8 Platform) Discussion
0
04-21-2015 07:19 AM
ECS Tuning-Audi
S4 (B8 Platform) Discussion
0
08-06-2014 12:30 PM
ECS Tuning-Audi
Vendor Showroom
0
08-06-2014 12:29 PM
ECS Tuning-Audi
Vendor Showroom
0
08-06-2014 12:16 PM