Harvi007

Hi, no it's wired just like that in the pic, but I've had in running now for 2 days and all is good with no pops or hiss.

My dsp bass on the mmi is set to about 1/3 and if i need a boost, i add 6db from the sub remote switch.

Thank you for your help, and i hope this thread helps others.

KORABLEW45

where did you get those leads. and which terminals they should be connected.new

Harvi007

Hi, when you replaced the Audi sub, there were 2 wires going into it, where are these wires now? These will be your input to your new amp.

You can trace them back to the loom or just use as they are.

Please provide a image of your amps inputs so we can see where these wires will go.

KORABLEW45

thats how it was. Take a picture of the evening with a new powerful subwoofer 400 watts.

Harvi007

Please give picture of Amp inputs not of sub or trunk.

KORABLEW45

KORABLEW45

http://static.eldorado.ru/instructions/710/71090250.pdf

Harvi007

Also what is the make and model of the Sub you have as I would need to know the ohms and if it is single voice coil or dual voice coil.

KORABLEW45

KORABLEW45

Yes forgot to write . Sabbufer with one coil 400 watts , 4 ohms , IVOLGA 10 F.