A6 / S6 (C5 Platform) Discussion Discussion forum for the C5 Audi A6 and S6 produced from 1998-2004

02 Audi a6 3.0 stalling problems

Thread Tools
 
Search this Thread
 
Old 08-18-2015, 04:18 PM
  #1  
Audiworld Junior Member
Thread Starter
 
Epicshawn15's Avatar
 
Join Date: Mar 2015
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default 02 Audi a6 3.0 stalling problems

On my audi a6 recently my EPC light came on so i changed my vehicle speed sensor, after some time the light came on again and i stalled at a red light with my rpms dropping to zero. Any help?
Old 08-18-2015, 06:51 PM
  #2  
AudiWorld Super User
 
jcman's Avatar
 
Join Date: Jan 2008
Location: NE Ohio
Posts: 2,700
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by Epicshawn15
On my audi a6 recently my EPC light came on so i changed my vehicle speed sensor, after some time the light came on again and i stalled at a red light with my rpms dropping to zero. Any help?
The EPC light is the Electronic Power Control which is basically a computer that controls your throttle (your car has a 'drive by wire' system), did you scan for codes? What lead you to believe that a vehicle speed sensor was causing this problem?? Most of all are you sure it's not the ESP light???

Read this link...clicky here https://www.audiworld.com/forums/a6-...e-epc-2799811/ something might apply
Old 08-18-2015, 07:04 PM
  #3  
Audiworld Junior Member
Thread Starter
 
Epicshawn15's Avatar
 
Join Date: Mar 2015
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default

No i didnt scan for codes, but im not upset about replacing the sensor and yes it is the EPC light. Just a recap of things ive done before this started taking place,
*I rewired my after market radio
*My oil cap somehow went missing, so i drove without that till i noticed,
Old 08-19-2015, 05:01 AM
  #4  
AudiWorld Super User
 
jcman's Avatar
 
Join Date: Jan 2008
Location: NE Ohio
Posts: 2,700
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by Epicshawn15
No i didnt scan for codes, but im not upset about replacing the sensor and yes it is the EPC light. Just a recap of things ive done before this started taking place,
*I rewired my after market radio
*My oil cap somehow went missing, so i drove without that till i noticed,
Vagcom/VCDS will show more than a generic OBD scan, this is the best means of diagnosis. It's hard for anyone to guess what's throwing the light with your info although I'm surprised that the car even ran normal or idled without the oil cap "huge vacuum leak", not too much more to say here.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jim Castronova
4.2 V8 Discussion
1
07-29-2019 10:08 AM
John1972
A6 / S6 (C6 Platform) Discussion
3
01-15-2018 04:12 AM
Phanes97
A6 / S6 (C6 Platform) Discussion
0
01-10-2016 10:36 PM
CaptBrandini
Audi 100 / A6 (C4 Platform)
4
09-28-2003 03:36 PM



Quick Reply: 02 Audi a6 3.0 stalling problems



All times are GMT -8. The time now is 02:28 PM.