A6 / S6 (C5 Platform) Discussion Discussion forum for the C5 Audi A6 and S6 produced from 1998-2004

'02 S6: Transmission whine

Thread Tools
 
Search this Thread
 
Old 09-20-2014, 07:03 PM
  #1  
Audiworld Junior Member
Thread Starter
 
rallymarty's Avatar
 
Join Date: Jul 2013
Location: Littleton, CO
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default '02 S6: Transmission whine

Have 02 S6. Tranny rebuilt ~17k miles ago.

About 2k miles after rebuild, started to notice a light whine under acceleration, 1st gear only, and around 2800-3k rpm 2-3 shift.

Took a business trip recently, got back to car in lot and when I started it up, the whine was very loud and I was freaking out, as DIA is 45 minutes from where I live.

Gave the car a minute to warm up, but still noticeable during shifts 1-2, 2-3.

Today, while going out, car is whining considerably, but is intermittent.

Thinking this could just be low on fluid, but I have noticed no leakage. Worried something was not properly torqued internally during rebuild and is now moving around, f*$cking up the gear mesh.

After some highway drive time, it gets a little less noisy, but today while driving around locally, it sounded terrible.

Looked under car this afternoon, and looked like there was drop from the rear drain plug(?). Going to put it up on stands and get a better look.

Thoughts from anyone who may have run low on fluid with 5HP24A and gear whining noise?
Old 09-21-2014, 05:32 AM
  #2  
AudiWorld Super User
 
georgeb944's Avatar
 
Join Date: Jul 2013
Location: In the Cloud
Posts: 2,468
Received 172 Likes on 162 Posts
Default

Check with your rebuilder... your trans should not do that.
Old 09-21-2014, 07:54 PM
  #3  
Audiworld Junior Member
Thread Starter
 
rallymarty's Avatar
 
Join Date: Jul 2013
Location: Littleton, CO
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

Car makes the whining noise during startup and shift changes, worst during 3-4. Not always there, intermittent, like something able to move in and out of position.

Torque converter?

Bolts to flex-plate, maybe bolts have loosened and converter is slipping ever so slightly on input shaft and rubbing in bellhousing?!
Old 09-22-2014, 03:34 AM
  #4  
AudiWorld Super User
 
georgeb944's Avatar
 
Join Date: Jul 2013
Location: In the Cloud
Posts: 2,468
Received 172 Likes on 162 Posts
Default

Originally Posted by rallymarty
Car makes the whining noise during startup and shift changes, worst during 3-4. Not always there, intermittent, like something able to move in and out of position.

Torque converter?

Bolts to flex-plate, maybe bolts have loosened and converter is slipping ever so slightly on input shaft and rubbing in bellhousing?!
It's internal to the transmission. Bad rebuild.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mesa512
S4 (B8 Platform) Discussion
20
07-07-2018 11:23 AM
Kerry G
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
5
05-18-2018 06:12 AM
gorkyc
A8 / S8 (D2 Platform) Discussion
7
10-04-2015 07:00 PM
navy_anav
A4 Cabriolet (B6 Platform) Discussion
0
09-30-2015 01:38 PM
jonedwd
Audi A3 / S3 / RS 3 MKII
2
09-26-2015 10:49 PM



Quick Reply: '02 S6: Transmission whine



All times are GMT -8. The time now is 08:12 PM.