Defon

hi guys today i retrofited cruise control on my c6 2006 2.7 tdi coded everythink, checked my cruize stalk in steering wheel its working,also checked both pedals in engine, also working. and i getting fault code in engine

1 Fault Found:

005481 - Cruise Control Switch (E45)
P1569 - 001 - Implausible Signal
Freeze Frame:
Fault Status: 01100001
Fault Priority: 0
Fault Frequency: 1
Reset counter: 255
Mileage: 255264 km
Time Indication: 0
Date: 2005.09.20
Time: 14:00:53

Freeze Frame:
RPM: 756 /min
Torque: 39.0 Nm
Speed: 0.0 km/h
Duty Cycle: 1.0 %
Voltage: 13.83 V
Bin. Bits: 11001111
Torque: 156.0 Nm


Readiness: 0 0 1 X 1

when i looked for that fault code in ross tech i found that:
Special Notes
If the Cruise Control System (CCS) was retrofitted, check the Wiring to the Engine Control Module (ECM). Depending on the Make, Model and Model Year the Hardware Signal can originate from one of the following Sources:

can someone tell me where should i place that wire.. ty guys. my english sucks.. sry for that