250k
01-26-2014, 12:10 PM
#1
AudiWorld Super User
Thread Starter
250k
well, i just rolled over 250k mls on my way back from Toas NM, and i need to replace one of my coolant temp sensors as it causes the check engine light to flicker periodically
01-31-2014, 11:02 PM
#7
AudiWorld Super User
Thread Starter
mostly just stick with the flow of traffic, also remembering what 35,45,60 and 75mph is in kmh helps 
it also confuses the crap out of my friends that tries to drive my car 
grillaga, thank you
shortly before the 250, she got a few upgrades, so a few less noises, stops pretty dorn good, and im loving the handling now
it also confuses the crap out of my friends that tries to drive my car grillaga, thank you
shortly before the 250, she got a few upgrades, so a few less noises, stops pretty dorn good, and im loving the handling now
Trending Topics
02-01-2014, 03:49 AM
#8
AudiWorld Super User
I notice you swapped the engine in 2008 so the engine has 250K or the body?
Good shot with the EBC, they should be x-drilled,dimpled and gold colored?
I put black dash slotted on the A6, really wish EBC made them for the 90 as they are great.
Still not a spec of rust on them, their paint job is excellent.
ATE and Zimmermann start to rust soon as you get them on although the new Zimmermann coated [went on my front] have stayed pretty spotless.
Good shot with the EBC, they should be x-drilled,dimpled and gold colored?
I put black dash slotted on the A6, really wish EBC made them for the 90 as they are great.
Still not a spec of rust on them, their paint job is excellent.
ATE and Zimmermann start to rust soon as you get them on although the new Zimmermann coated [went on my front] have stayed pretty spotless.
02-02-2014, 11:52 AM
#9
AudiWorld Super User
Thread Starter
the engine has about 50k less then everything else.
the EBC's are not cross drilled actually, they are dimpled here is some info on them http://rpmware.com/catalog/group/63415 the coating is aether copper or bronze plating which wears out in the first 3 times you brake
I must say, 3GD Series Dimpled and Slotted Sport Rotor are friging amazing, it feels like my front end is about to get ripped out and passed by the back end. the only down side of these rotors, if you try to brake at about 60+mph, the brakes are loud, they stop grate, but they are LOUD, kinda scary at first.
the black ones appear to be a batter design for every day use... but they dont make them for our cars:-S
the EBC's are not cross drilled actually, they are dimpled here is some info on them http://rpmware.com/catalog/group/63415 the coating is aether copper or bronze plating which wears out in the first 3 times you brake
I must say, 3GD Series Dimpled and Slotted Sport Rotor are friging amazing, it feels like my front end is about to get ripped out and passed by the back end. the only down side of these rotors, if you try to brake at about 60+mph, the brakes are loud, they stop grate, but they are LOUD, kinda scary at first.
the black ones appear to be a batter design for every day use... but they dont make them for our cars:-S
02-04-2014, 08:32 PM
#10
AudiWorld Super User
True, I should have said slotted and dimpled. They do bite like a bitch especially with EBC Ultimax pads.
The coating I thought was zinc-cadmium and yeah it will wear on the face but the rest will stay spot free.
Still not a drop of rust on the blackdash, non face of course which is nice.
Nothing looks worse then rusty rotors through nice rims.
The coating I thought was zinc-cadmium and yeah it will wear on the face but the rest will stay spot free.
Still not a drop of rust on the blackdash, non face of course which is nice.
Nothing looks worse then rusty rotors through nice rims.
Thread
Thread Starter
Forum
Replies
Last Post
DavidA
A8 / S8 (D4 Platform) Discussion
0
11-23-2018 09:10 PM
hzhao
Q7 MK 1 Discussion
14
07-14-2007 08:50 AM
AudiDen aka 2Turbos
A6 / S6 (C5 Platform) Discussion
7
02-17-2006 03:20 PM
Bond... Darryl Bond
S4 / RS4 (B5 Platform) Discussion
1
09-07-2001 06:29 AM
