2015 A3 - Rear Shocks Noise
#1
Audiworld Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
2015 A3 - Rear Shocks Noise
Has anyone else experienced any noise or squeeks from their rear shocks? It is considerably worse when I've been driving vs. the car sitting over night. Both sides do it. I'm at 20k miles, but it has done it for the last several thousand miles
Video is below. Sorry for the shaky video
https://youtu.be/D8f-PbyUJCI
Video is below. Sorry for the shaky video
https://youtu.be/D8f-PbyUJCI
Last edited by TorinTPG; 07-05-2015 at 03:11 PM.
#2
My driver side shock made a squeek for a period of two hours on sunday (reproduced in garage as well,) the next day it was gone and has not occurred again.
Dust guard around the shock sometimes can cause these noises if it takes damage and then rubs against the shock, I haven't looked at mine.
Dust guard around the shock sometimes can cause these noises if it takes damage and then rubs against the shock, I haven't looked at mine.
#3
Audiworld Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
My driver side shock made a squeek for a period of two hours on sunday (reproduced in garage as well,) the next day it was gone and has not occurred again.
Dust guard around the shock sometimes can cause these noises if it takes damage and then rubs against the shock, I haven't looked at mine.
Dust guard around the shock sometimes can cause these noises if it takes damage and then rubs against the shock, I haven't looked at mine.
Iguess I should take it by the dealership
#5
#6
Audiworld Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like the Shocks or struts, but not 100 percent certain.
I can't imagine there is any shipping packaging in there. 2 oil changes and a tire rotation and no one said anything
I can't imagine there is any shipping packaging in there. 2 oil changes and a tire rotation and no one said anything
Thread
Thread Starter
Forum
Replies
Last Post
CMC
A4 (B5 Platform) Discussion
0
06-17-2000 07:20 PM