No rt side mirror dip
#1
AudiWorld Senior Member
Thread Starter
No rt side mirror dip
Is this feature possible on my 2015 A3 prem plus Cab? Have tried usual ways from previous cars,but nothing. Not covered in MMI or other manuals.
Also working on voice activation--any how to's?
Some successes-Now have Homelink,Garmin Nav,SD card audio & BU camera soon. Also new Conti DWS-06 tires.
Also working on voice activation--any how to's?
Some successes-Now have Homelink,Garmin Nav,SD card audio & BU camera soon. Also new Conti DWS-06 tires.
Last edited by greasykid; 05-02-2016 at 11:46 AM.
#5
Audiworld Junior Member
Join Date: Sep 2015
Location: San Diego, CA
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
I enabled it via VCDS on my 2015 P+, but ended up having to disable it. No matter what I did with regard to programming the position, it would always dip too far or return too high. It was completely unusable, since I'd have to manually adjust my mirror every time I'd shift into reverse and back.
In the forum threads I've read, it appears to be due to the mirror's motor not having an actual memory setting or some such. However, YMMV.
In the forum threads I've read, it appears to be due to the mirror's motor not having an actual memory setting or some such. However, YMMV.
#7
AudiWorld Super User
I enabled it via VCDS on my 2015 P+, but ended up having to disable it. No matter what I did with regard to programming the position, it would always dip too far or return too high. It was completely unusable, since I'd have to manually adjust my mirror every time I'd shift into reverse and back.
In the forum threads I've read, it appears to be due to the mirror's motor not having an actual memory setting or some such. However, YMMV.
In the forum threads I've read, it appears to be due to the mirror's motor not having an actual memory setting or some such. However, YMMV.
Yep, me too expect that it dipped just fine, but returned way too high.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
dseag2
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
5
12-18-2009 11:26 AM