Hazard Flasher module replacement
02-09-2010, 02:18 PM
#1
Audiworld Junior Member
Thread Starter
Join Date: Nov 2006
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Hazard Flasher module replacement
Did not find allroad specific tech article on this DIY. Did see one on an A6. Can someone help me out with the AR? Sounds like Paulroad has been there, done that.
02-09-2010, 02:55 PM
#2
AudiWorld Super User
Join Date: Jul 2005
Posts: 2,484
Likes: 0
Received 0 Likes
on
0 Posts
Same as -
Gently pull the wood trim (6 clips, 3 along the bottom and three on top) I used some autobody specific tools I have. I did break 1 clip (very fragile) glued it back on. The hazard switch itself has clips on each side, a gentle pry and a good pull will get it out.
location of those clips:
<img src="https://forums.audiworld.com/picture.php?albumid=94034&pictureid=208280">
location of those clips:
<img src="https://forums.audiworld.com/picture.php?albumid=94034&pictureid=208280">
Thread
Thread Starter
Forum
Replies
Last Post
girlroad
Audi allroad
6
12-14-2008 02:50 PM
eurovan5150
A6 / S6 (C5 Platform) Discussion
5
11-02-2008 02:38 PM
