VAG-COM will not detect my RNS-E
#1
Audiworld Junior Member
Thread Starter
Join Date: Mar 2014
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
VAG-COM will not detect my RNS-E
Hey guys,
I've gone through two different RNS-E's,
The stock one in my RS4 and then an updated one out of a TT.
Whenever I try to connect it basically times out when it tries to connect to it,
I use Ross-Tech and I've been able to communicate with everything except the audi/navi components.
Is there any way to check on the wiring?
I got a new loom when I ordered the new RNS-E, but I am unsure where the wires go on the car side or if they even terminate in an easy clip or cutting would be involved.
Any insight would be appreciated,
Cheers,
~Mic
I've gone through two different RNS-E's,
The stock one in my RS4 and then an updated one out of a TT.
Whenever I try to connect it basically times out when it tries to connect to it,
I use Ross-Tech and I've been able to communicate with everything except the audi/navi components.
Is there any way to check on the wiring?
I got a new loom when I ordered the new RNS-E, but I am unsure where the wires go on the car side or if they even terminate in an easy clip or cutting would be involved.
Any insight would be appreciated,
Cheers,
~Mic
Last edited by micmckee; 06-16-2014 at 11:16 AM.
#3
Is there any non standard equipment attached to the RNS-E. For example I have a Yatour for my ipod. And when it is attached my Vag-com does not detect the RNS-E in my 2006 S4.
#4
Audiworld Junior Member
Thread Starter
Join Date: Mar 2014
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
No track names, just time.
#6
Audiworld Junior Member
Thread Starter
Join Date: Mar 2014
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
shorki_07
A4 (B5 Platform) Discussion
1
11-02-2003 04:52 PM