WolfgangCarCare

Just wanted to share this thread our friend Caleb created over at Autogeekonline.net

Last week I finally got to try out my new Wolfgang Uber AIO. I do a lot of BMW's and Mercedes and they are both known to have hard paint. This 99 BMW 330 with rock hard jet black paint was the perfect candidate.

The Color of Wolfgang Uber AIO is a light green with a pleasant carnauba scent. I chose to use my FLEX 3401 with an LC Orange Hybrid Pad on speed 6. I needed everything I could for this hard paint. I made a total of 6 passes on speed 6, and the results turned out fantastic! I really like this AIO. It cuts well and finishes very VERY nice. I would say It wins against my current go to AIO in terms of finishing ability, but not in the cutting department. That is not to say that this does not cut well.

I hope you enjoyed and Ill let the pictures do the rest of the talking :buffing:. I'm interested in hearing your comments and questions .

DSC00446 by impeccableimagedetailing, on Flickr

DSC00447 by impeccableimagedetailing, on Flickr

The test subject
DSC00443 by impeccableimagedetailing, on Flickr

DSC00445 by impeccableimagedetailing, on Flickr

6 section passes and ready to wipe off
DSC00448 by impeccableimagedetailing, on Flickr

After
DSC00449 by impeccableimagedetailing, on Flickr

DSC00450 by impeccableimagedetailing, on Flickr

50/50
DSC00451 by impeccableimagedetailing, on Flickr

50/50
DSC00457 by impeccableimagedetailing, on Flickr

Before
DSC00455 by impeccableimagedetailing, on Flickr

After
DSC00456 by impeccableimagedetailing, on Flickr