Mark this thread as Unsold
component protection removal
#1
AudiWorld Senior Member
Thread Starter
component protection removal
HI
I can organise component protection removal and online coding remotely over the interweb. (genune audi connect to server)
PM me if interested.
I can organise component protection removal and online coding remotely over the interweb. (genune audi connect to server)
PM me if interested.
The following 3 users liked this post by storka:
#2
Component Protection Removal
Can you advise how you can provide component protection removal via the internet? i have a 2004 A8L which I am interested in having this done to. I also just had a new battery installed and need to re-code the windows as they no longer have the auto up function that they did prior to changing the battery.
I am also interested in learning if anyone has recorded the driver and passenger side mirrors so that they will fold up automatically when the ignition is turned off. i have the coding from another Audi model that does this and wondered if simply updating the coding in the A8L would provide this feature. I raise m y mirrors when I park the car and it would be a nice convenience feature.
I need the component level protection removal as I have all of the hardware to install the factory bluetooth phone system which was not offered on '04 models. I purchased the wiring harness from Kufatec, bluetooth module is factory (used), have bluetooth antenna and should be able to install the wiring with out too much difficulty.
I had a custom fiber cable made to allow me to add another accessory looped in from the CD changer as I want to add a AUDI 98-10 GROM USB Android iPhone integration adapter. This will allow me to connect solid state hard drives to my audio system and play out my extensive audio collection.
I have the SDS module that I want to install and recode it to English language so that it will provide me with full voice command for the phone, Audio system, and GPS which should be pretty nice if it works like it is supposed to.
Let me know if you can help me out. You may call me directly if you would like to speak with me at 212-254-3541. Where are you located?
Cliff P.
I am also interested in learning if anyone has recorded the driver and passenger side mirrors so that they will fold up automatically when the ignition is turned off. i have the coding from another Audi model that does this and wondered if simply updating the coding in the A8L would provide this feature. I raise m y mirrors when I park the car and it would be a nice convenience feature.
I need the component level protection removal as I have all of the hardware to install the factory bluetooth phone system which was not offered on '04 models. I purchased the wiring harness from Kufatec, bluetooth module is factory (used), have bluetooth antenna and should be able to install the wiring with out too much difficulty.
I had a custom fiber cable made to allow me to add another accessory looped in from the CD changer as I want to add a AUDI 98-10 GROM USB Android iPhone integration adapter. This will allow me to connect solid state hard drives to my audio system and play out my extensive audio collection.
I have the SDS module that I want to install and recode it to English language so that it will provide me with full voice command for the phone, Audio system, and GPS which should be pretty nice if it works like it is supposed to.
Let me know if you can help me out. You may call me directly if you would like to speak with me at 212-254-3541. Where are you located?
Cliff P.
The following users liked this post:
Otengz (09-16-2020)
#3
AudiWorld Senior Member
Thread Starter
I can put you on to jack in Poland who does it remotely . Works he did the cp on my cd player.
You need a clone vas 5054A is the most important thing. About $130 ebay.
Recoding for convenience closing and opening is on your mmi screen options under car options I think. They go a funny after power out.
I don't think the mirrors fold up auto after stopping been a bit discussed about this if you search through the forums.
No CP on the blue tooth I have done this on my 04.
He is a audi vw mech so he will not not give too much away for free.
But he can do all vas online coding and cp.
You need a clone vas 5054A is the most important thing. About $130 ebay.
Recoding for convenience closing and opening is on your mmi screen options under car options I think. They go a funny after power out.
I don't think the mirrors fold up auto after stopping been a bit discussed about this if you search through the forums.
No CP on the blue tooth I have done this on my 04.
He is a audi vw mech so he will not not give too much away for free.
But he can do all vas online coding and cp.
Last edited by storka; 11-27-2015 at 11:16 PM.
#4
AudiWorld Senior Member
Thread Starter
This the process I went through for the CP remal on my cd mp3 stacker
[15/11/2015 7:06:28 PM] Graham : Let me know when you want to do this cp
Regards Graham
[17/11/2015 3:10:52 AM] Jack : hello
[17/11/2015 3:11:27 AM] Jack : we must write when i have morning i see
[17/11/2015 3:11:34 AM] Jack : i try contact you
[17/11/2015 4:03:33 PM] Graham : Your 7 am is my 4pm 9 hrs in front of your time.
I don't know what time is convenient for you.
If you want to do it morning your time I'm available usually after 6 am your time. It's not super urgent. If you want Friday or Saturday I can be up late in the night. If all goes well do you want me to give you recommendation on a8 forum ?
Regards Graham
[17/11/2015 6:39:11 PM] Jack : Hello
[17/11/2015 6:39:24 PM] Jack : tuesday is ok?
[17/11/2015 6:39:46 PM] Jack : in my morning time - 6am
[17/11/2015 6:39:50 PM] Graham: Hi yes
[17/11/2015 6:40:18 PM] Jack : ok, so we contact then
[17/11/2015 6:40:38 PM] Jack : you can give recommendation on forum, no problem
[17/11/2015 6:42:57 PM] Graham : That will be 3 pm here I will make sure I get home by then.
There are quite a few of them that need cp or such that need online stuff done
Cheers
[17/11/2015 6:43:32 PM] Jack : ok, so maybe 9am my time?
[17/11/2015 6:43:41 PM] Jack : you will 100% in home?
[17/11/2015 6:44:34 PM] Graham : Ok but don't put yourself out
[17/11/2015 6:44:47 PM] Jack : ok
[17/11/2015 6:45:52 PM] Graham : 9.45 is your time now?
[17/11/2015 6:45:57 PM] Jack : yes
[17/11/2015 6:46:06 PM] Graham : Ok
[17/11/2015 6:47:05 PM] Graham : Ok see you tomorrow 6 pm my time
[17/11/2015 6:47:12 PM] Jack : see you
[17/11/2015 8:16:45 PM] Graham : Did you mean Wednesday today is Tuesday ?
[17/11/2015 8:17:11 PM] Jack : oh sorry
[17/11/2015 8:17:15 PM] Jack : i mean 19.11
[17/11/2015 8:17:18 PM] Jack : 2015
[17/11/2015 8:17:28 PM] Jack : today i have 17
[17/11/2015 8:18:09 PM] Graham : So Thursday 19th
[17/11/2015 8:18:23 PM] Jack : yes
[17/11/2015 8:18:52 PM] Graham: All good
Bye
[19/11/2015 4:40:02 PM] Graham : I am at whenever you are ready
[19/11/2015 4:40:12 PM] Graham: Home
[19/11/2015 5:50:45 PM] Jack : hi
[19/11/2015 5:50:57 PM] Graham :
[19/11/2015 5:51:02 PM] Jack : are you?
[19/11/2015 5:51:07 PM] Graham : Hi jack
[19/11/2015 5:51:14 PM] Jack : ok
[19/11/2015 5:51:30 PM] Jack : please insatl 2 programs
[19/11/2015 5:51:51 PM] *** ***
[19/11/2015 5:52:27 PM] Graham : Two minutes I have to go to the carport
I am on the iPad will swap over
[19/11/2015 5:52:34 PM] Jack : ok
[19/11/2015 5:52:47 PM] Jack : and then give me teamviewer - i configure all
[19/11/2015 5:53:55 PM] Graham : ok on the laptop with car
[19/11/2015 5:54:13 PM] Graham : installing
[19/11/2015 5:54:50 PM] *** ***
[19/11/2015 5:57:03 PM] Graham : 157 907 481
[19/11/2015 5:57:22 PM] Graham : 2073
[19/11/2015 5:57:59 PM] Graham : installing 2nd
[19/11/2015 5:59:25 PM] Graham : what do i nee to do with team viewer?
[19/11/2015 6:02:47 PM] Jack : all ok
[19/11/2015 6:02:58 PM] Jack : ping a little high but will work
[19/11/2015 6:03:05 PM] Jack : only need more time
[19/11/2015 6:03:32 PM] Graham: Yes
Internet slows here about 6pm
[19/11/2015 6:04:14 PM] Graham : I'm on iPad not touching laptop
[19/11/2015 6:04:59 PM] Jack : ok, give me 30 - 40 min
[19/11/2015 6:05:13 PM] Graham : Ok
[19/11/2015 6:10:12 PM] Graham : Ok if I go for 10 minutes ignition is on
[19/11/2015 6:10:22 PM] Jack : ok
[19/11/2015 6:20:43 PM] Graham : Back
[19/11/2015 6:22:59 PM] Graham : I have ami but have disconnected and optic fibre loop installed
[19/11/2015 6:23:26 PM] Jack : ok, it is no problem
[19/11/2015 6:31:22 PM] Graham : Internet here 5Mbs
[19/11/2015 6:31:38 PM] Jack : i have 250Mbs
[19/11/2015 6:31:53 PM] Jack : on fiber cable
[19/11/2015 6:32:45 PM] Graham : We are waiting for optic fibre
Big country few people
[19/11/2015 6:41:50 PM] Jack : please ignition on
[19/11/2015 6:42:16 PM] Graham : Ok
[19/11/2015 6:43:51 PM] Graham : Cd stacker on or off or does not matter ?
[19/11/2015 6:44:23 PM] Jack : dont change anything now
[19/11/2015 6:44:31 PM] Graham : Ok
[19/11/2015 6:45:56 PM] Jack : ok
[19/11/2015 6:46:02 PM] Jack : please check if works ok
[19/11/2015 6:46:10 PM] Jack : all will be ok
[19/11/2015 6:46:29 PM] Graham : Great thank you
[19/11/2015 6:47:14 PM] Jack : all ok?
[19/11/2015 6:47:22 PM] Jack : i dont have microphone
[19/11/2015 6:48:13 PM] Graham : Your email for PayPal or Bill me at
[19/11/2015 6:48:28 PM] Graham : Try to connect Skype
[19/11/2015 6:48:38 PM] Jack : my paypal ?????@gmail.com
[19/11/2015 6:50:29 PM] Jack : please send as a friend
[19/11/2015 6:50:33 PM] Jack : money
[19/11/2015 6:58:17 PM] Graham : Ok sent money.
Is it correct had to convert from Australian dollars to ero
[19/11/2015 6:59:33 PM] Jack : it is ok
[19/11/2015 7:00:23 PM] Graham : Thanks once again. Next Audi stealer from here is 2000k south
I will get you some a8 customers.
Nice to do business with you.
[19/11/2015 7:00:51 PM | Edited 7:01:46 PM] Jack : I can do all online functions in vw and audi
[19/11/2015 7:01:17 PM] Jack : immo, keys, component protections, svm coding (coding to factory state)
[15/11/2015 7:06:28 PM] Graham : Let me know when you want to do this cp
Regards Graham
[17/11/2015 3:10:52 AM] Jack : hello
[17/11/2015 3:11:27 AM] Jack : we must write when i have morning i see
[17/11/2015 3:11:34 AM] Jack : i try contact you
[17/11/2015 4:03:33 PM] Graham : Your 7 am is my 4pm 9 hrs in front of your time.
I don't know what time is convenient for you.
If you want to do it morning your time I'm available usually after 6 am your time. It's not super urgent. If you want Friday or Saturday I can be up late in the night. If all goes well do you want me to give you recommendation on a8 forum ?
Regards Graham
[17/11/2015 6:39:11 PM] Jack : Hello
[17/11/2015 6:39:24 PM] Jack : tuesday is ok?
[17/11/2015 6:39:46 PM] Jack : in my morning time - 6am
[17/11/2015 6:39:50 PM] Graham: Hi yes
[17/11/2015 6:40:18 PM] Jack : ok, so we contact then
[17/11/2015 6:40:38 PM] Jack : you can give recommendation on forum, no problem
[17/11/2015 6:42:57 PM] Graham : That will be 3 pm here I will make sure I get home by then.
There are quite a few of them that need cp or such that need online stuff done
Cheers
[17/11/2015 6:43:32 PM] Jack : ok, so maybe 9am my time?
[17/11/2015 6:43:41 PM] Jack : you will 100% in home?
[17/11/2015 6:44:34 PM] Graham : Ok but don't put yourself out
[17/11/2015 6:44:47 PM] Jack : ok
[17/11/2015 6:45:52 PM] Graham : 9.45 is your time now?
[17/11/2015 6:45:57 PM] Jack : yes
[17/11/2015 6:46:06 PM] Graham : Ok
[17/11/2015 6:47:05 PM] Graham : Ok see you tomorrow 6 pm my time
[17/11/2015 6:47:12 PM] Jack : see you
[17/11/2015 8:16:45 PM] Graham : Did you mean Wednesday today is Tuesday ?
[17/11/2015 8:17:11 PM] Jack : oh sorry
[17/11/2015 8:17:15 PM] Jack : i mean 19.11
[17/11/2015 8:17:18 PM] Jack : 2015
[17/11/2015 8:17:28 PM] Jack : today i have 17
[17/11/2015 8:18:09 PM] Graham : So Thursday 19th
[17/11/2015 8:18:23 PM] Jack : yes
[17/11/2015 8:18:52 PM] Graham: All good
Bye
[19/11/2015 4:40:02 PM] Graham : I am at whenever you are ready
[19/11/2015 4:40:12 PM] Graham: Home
[19/11/2015 5:50:45 PM] Jack : hi
[19/11/2015 5:50:57 PM] Graham :
[19/11/2015 5:51:02 PM] Jack : are you?
[19/11/2015 5:51:07 PM] Graham : Hi jack
[19/11/2015 5:51:14 PM] Jack : ok
[19/11/2015 5:51:30 PM] Jack : please insatl 2 programs
[19/11/2015 5:51:51 PM] *** ***
[19/11/2015 5:52:27 PM] Graham : Two minutes I have to go to the carport
I am on the iPad will swap over
[19/11/2015 5:52:34 PM] Jack : ok
[19/11/2015 5:52:47 PM] Jack : and then give me teamviewer - i configure all
[19/11/2015 5:53:55 PM] Graham : ok on the laptop with car
[19/11/2015 5:54:13 PM] Graham : installing
[19/11/2015 5:54:50 PM] *** ***
[19/11/2015 5:57:03 PM] Graham : 157 907 481
[19/11/2015 5:57:22 PM] Graham : 2073
[19/11/2015 5:57:59 PM] Graham : installing 2nd
[19/11/2015 5:59:25 PM] Graham : what do i nee to do with team viewer?
[19/11/2015 6:02:47 PM] Jack : all ok
[19/11/2015 6:02:58 PM] Jack : ping a little high but will work
[19/11/2015 6:03:05 PM] Jack : only need more time
[19/11/2015 6:03:32 PM] Graham: Yes
Internet slows here about 6pm
[19/11/2015 6:04:14 PM] Graham : I'm on iPad not touching laptop
[19/11/2015 6:04:59 PM] Jack : ok, give me 30 - 40 min
[19/11/2015 6:05:13 PM] Graham : Ok
[19/11/2015 6:10:12 PM] Graham : Ok if I go for 10 minutes ignition is on
[19/11/2015 6:10:22 PM] Jack : ok
[19/11/2015 6:20:43 PM] Graham : Back
[19/11/2015 6:22:59 PM] Graham : I have ami but have disconnected and optic fibre loop installed
[19/11/2015 6:23:26 PM] Jack : ok, it is no problem
[19/11/2015 6:31:22 PM] Graham : Internet here 5Mbs
[19/11/2015 6:31:38 PM] Jack : i have 250Mbs
[19/11/2015 6:31:53 PM] Jack : on fiber cable
[19/11/2015 6:32:45 PM] Graham : We are waiting for optic fibre
Big country few people
[19/11/2015 6:41:50 PM] Jack : please ignition on
[19/11/2015 6:42:16 PM] Graham : Ok
[19/11/2015 6:43:51 PM] Graham : Cd stacker on or off or does not matter ?
[19/11/2015 6:44:23 PM] Jack : dont change anything now
[19/11/2015 6:44:31 PM] Graham : Ok
[19/11/2015 6:45:56 PM] Jack : ok
[19/11/2015 6:46:02 PM] Jack : please check if works ok
[19/11/2015 6:46:10 PM] Jack : all will be ok
[19/11/2015 6:46:29 PM] Graham : Great thank you
[19/11/2015 6:47:14 PM] Jack : all ok?
[19/11/2015 6:47:22 PM] Jack : i dont have microphone
[19/11/2015 6:48:13 PM] Graham : Your email for PayPal or Bill me at
[19/11/2015 6:48:28 PM] Graham : Try to connect Skype
[19/11/2015 6:48:38 PM] Jack : my paypal ?????@gmail.com
[19/11/2015 6:50:29 PM] Jack : please send as a friend
[19/11/2015 6:50:33 PM] Jack : money
[19/11/2015 6:58:17 PM] Graham : Ok sent money.
Is it correct had to convert from Australian dollars to ero
[19/11/2015 6:59:33 PM] Jack : it is ok
[19/11/2015 7:00:23 PM] Graham : Thanks once again. Next Audi stealer from here is 2000k south
I will get you some a8 customers.
Nice to do business with you.
[19/11/2015 7:00:51 PM | Edited 7:01:46 PM] Jack : I can do all online functions in vw and audi
[19/11/2015 7:01:17 PM] Jack : immo, keys, component protections, svm coding (coding to factory state)
#6
AudiWorld Senior Member
Thread Starter
Just an update. A few people have used him but people are too slack to write up after they get what they want.
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Search for Jack @@@@ in Poland on Skype
He is not a freeby person. He is a vw Audi mech.
Charged me 45 euro for the work he did for me.
Tell him Graham sent you.
Post your experience when you get a chance.
Hi,
Thanks for the contact you gave me. I managed to contact him and was able to scan my car and came up with loads of fault codes. The guy adviced me to change bcm2 and he will help me with coding. Will post the scan results.
Hi
No problem.
He is a bit of a wiz.
When he is finished do a bit of a write up on my thread as most people are a bit sceptical about this I think.
Cheers
Hi
I will definitely write. I have a strong feeling this guy knows his stuff because the Audi dealer could not diagnose the car but he managed to explain how to do it. I will keep you posted. Thanks
How did it all go ?
Hi. Almost there now just waiting to get a new BCM2 which is quite expensive from the dealers. Hopefully soon and Jack has been helpful. Will keep you posted when I am done.
Ok sounds promising
Hi
Sorry I haven't been on the forum. Jack managed to sort my car perfectly. That guy is a genius. I wouldn't mind to recommend him to anyone. He knows his stuff for sure. I would like also to thank you for recommending him to me. Just wanted to share the update with you.
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Search for Jack @@@@ in Poland on Skype
He is not a freeby person. He is a vw Audi mech.
Charged me 45 euro for the work he did for me.
Tell him Graham sent you.
Post your experience when you get a chance.
Hi,
Thanks for the contact you gave me. I managed to contact him and was able to scan my car and came up with loads of fault codes. The guy adviced me to change bcm2 and he will help me with coding. Will post the scan results.
Hi
No problem.
He is a bit of a wiz.
When he is finished do a bit of a write up on my thread as most people are a bit sceptical about this I think.
Cheers
Hi
I will definitely write. I have a strong feeling this guy knows his stuff because the Audi dealer could not diagnose the car but he managed to explain how to do it. I will keep you posted. Thanks
How did it all go ?
Hi. Almost there now just waiting to get a new BCM2 which is quite expensive from the dealers. Hopefully soon and Jack has been helpful. Will keep you posted when I am done.
Ok sounds promising
Hi
Sorry I haven't been on the forum. Jack managed to sort my car perfectly. That guy is a genius. I wouldn't mind to recommend him to anyone. He knows his stuff for sure. I would like also to thank you for recommending him to me. Just wanted to share the update with you.
Trending Topics
#8
Audiworld Junior Member
Just an update. A few people have used him but people are too slack to write up after they get what they want.
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Search for Jack @@@@ in Poland on Skype
He is not a freeby person. He is a vw Audi mech.
Charged me 45 euro for the work he did for me.
Tell him Graham sent you.
Post your experience when you get a chance.
Hi,
Thanks for the contact you gave me. I managed to contact him and was able to scan my car and came up with loads of fault codes. The guy adviced me to change bcm2 and he will help me with coding. Will post the scan results.
Hi
No problem.
He is a bit of a wiz.
When he is finished do a bit of a write up on my thread as most people are a bit sceptical about this I think.
Cheers
Hi
I will definitely write. I have a strong feeling this guy knows his stuff because the Audi dealer could not diagnose the car but he managed to explain how to do it. I will keep you posted. Thanks
How did it all go ?
Hi. Almost there now just waiting to get a new BCM2 which is quite expensive from the dealers. Hopefully soon and Jack has been helpful. Will keep you posted when I am done.
Ok sounds promising
Hi
Sorry I haven't been on the forum. Jack managed to sort my car perfectly. That guy is a genius. I wouldn't mind to recommend him to anyone. He knows his stuff for sure. I would like also to thank you for recommending him to me. Just wanted to share the update with you.
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Quote:
Originally Posted by Tendai Kufandirori
Quote:
Originally Posted by storka
Search for Jack @@@@ in Poland on Skype
He is not a freeby person. He is a vw Audi mech.
Charged me 45 euro for the work he did for me.
Tell him Graham sent you.
Post your experience when you get a chance.
Hi,
Thanks for the contact you gave me. I managed to contact him and was able to scan my car and came up with loads of fault codes. The guy adviced me to change bcm2 and he will help me with coding. Will post the scan results.
Hi
No problem.
He is a bit of a wiz.
When he is finished do a bit of a write up on my thread as most people are a bit sceptical about this I think.
Cheers
Hi
I will definitely write. I have a strong feeling this guy knows his stuff because the Audi dealer could not diagnose the car but he managed to explain how to do it. I will keep you posted. Thanks
How did it all go ?
Hi. Almost there now just waiting to get a new BCM2 which is quite expensive from the dealers. Hopefully soon and Jack has been helpful. Will keep you posted when I am done.
Ok sounds promising
Hi
Sorry I haven't been on the forum. Jack managed to sort my car perfectly. That guy is a genius. I wouldn't mind to recommend him to anyone. He knows his stuff for sure. I would like also to thank you for recommending him to me. Just wanted to share the update with you.
Hello. I need to remove CP and i try to look for jack in poland on skype but no luck.. Could you have me to link with him... Thank you
#9
Can you help me please
I can put you on to jack in Poland who does it remotely . Works he did the cp on my cd player.
You need a clone vas 5054A is the most important thing. About $130 ebay.
Recoding for convenience closing and opening is on your mmi screen options under car options I think. They go a funny after power out.
I don't think the mirrors fold up auto after stopping been a bit discussed about this if you search through the forums.
No CP on the blue tooth I have done this on my 04.
He is a audi vw mech so he will not not give too much away for free.
But he can do all vas online coding and cp.
You need a clone vas 5054A is the most important thing. About $130 ebay.
Recoding for convenience closing and opening is on your mmi screen options under car options I think. They go a funny after power out.
I don't think the mirrors fold up auto after stopping been a bit discussed about this if you search through the forums.
No CP on the blue tooth I have done this on my 04.
He is a audi vw mech so he will not not give too much away for free.
But he can do all vas online coding and cp.
Any chance you can point me in jacks direction to have my new radio with dab protection removed please
Thank you so much
#10
Hello Storka,
Thank you very much for your help, without Jack my RS6 would certainly be
stuck in my garage.
Replacing the BCM requires the skills of a pro. My RS6 now has stunning
dynamic tail lights.
Thanks again,
Thank you very much for your help, without Jack my RS6 would certainly be
stuck in my garage.
Replacing the BCM requires the skills of a pro. My RS6 now has stunning
dynamic tail lights.
Thanks again,