raj99

I have a set of FACTORY OEM 20" wheels off an A8, which will fit a variety of vehicles (i.e. A6, A7, A8, etc...). Part # 4H0601025AE

Size: 20x9
Lugs: 5
Bolt Pattern: 5x112mm
Offset: 37mm
Option: F27
Audi Part Number: 4H0601025AE

All 4 of the wheels are GREAT condition, 3 being like new and one has a small scratch on an edge which makes it not "like new", hence just great. I'm VERY picky and meticulous with my car, so these are no different. These come with the Audi center caps.

$1000 for all 4 + shipping. I can usually get shipping in the CONUS for about $125 for all 4.

Teamelevation

where are you located?

raj99

I'm clear across the country from you, since your in NY.

MP4.2+6.0

I'll try checking... SF Bay Area for me. Better for proximity by chance?

raj99

I'm just outside of Seattle. But shipping will be about the same, since I'll be doing it via FedEx and that's via a commercial contract.

MP4.2+6.0

Warming back up on these.

1. Can you post pic of the one you mention as somewhat scratched? I didn't notice anything specific in the pics already here.

2. Are these particular ones the typical Audi silver on the inside/barrels and side of spokes, or are they the other version with the light smoke/grey barrels and sides of spokes? Not sure from pics; seems like the two tome one w/ the smoke insides from part # check.

3. Can you weigh one on a bathroom scale or something. Just want to get some sense of heavy vs. light. D3 wheels in same diameter for example vary by 5 or more pounds just depending on which design it is. I think this may be one of the better ones.

Thanks.

raj99

1 - Will do, but won't have time to go over to my storage to pull them again and post the specific scratch on the one rim
2 - Good question, when I go over on the weekend, I'll be sure to get better pics and also confirm that they are the light gray sided ones, which I believe they are.
3 - I'll bring a scale and weigh them for you and also let you know if there's any discrepancy in weight and the total weight.

MP4.2+6.0

Thanks. Have these on my active shopping list, so time is for a good purpose. On scratch, from text I couldn't tell if it was more the "it happens" small stuff that I just live with or touch up a bit over life of a wheel set, or the more significant think about refinishing, especially on a polished face wheel. I know what the D3 OE ones weigh in 20 x 9 size--a little over 25 lbs. is light, 30+ is heavy but pretty common in Audi OE/stock ones. Weight of any one of them is all I need assuming they were the same set/part #'s.

dopeboyz

pm'd

pearl2k

I can ship these out for you guys when you get them sold. It'll be even less than your commercial account.