stanbSQ5

So I was reading that the 29001 -3 drops the back more. So I called h&r they said that's the correct ones for the truck has anyone had issues with the -3 . I still haven't them in box so I wanna clear this up. ECS has -3 for Sq5. Also tire rack. Some people are saying get the 29001-1

Q5. 3.0T 29001-1
Q5 TDi 29001-2
Sq5 29001-3
This link says different for the 29001-1 is for q5/Sq5 til 2014
Audi Q5, SQ5 (2009 - 2014) - Suspension Upgrades & Performance - Page 1

What I saw.

CORS6

Screw H&R

I told those asshats to fix the catalog and they blew me off.

I installed -3s and the result sucked. Front 1.0, rear 1.5 drop.

I complained and they sent me -1 front springs to drop 1.6 front. I had to do the work twice.

Any questions?

Another Audizine member just had the same problem. Guess what? He gets to do it again.

stanbSQ5

have you seen this one . Looks normal he got the -3 [/URL]

stanbSQ5

Any pics btw?

CORS6

Yeah

And his gaps are larger in the front. The picture is taken on a down slope. He said the front dropped 1.2 and rear 1.5.

Oh and guess what. He is replacing the springs.

I sent true side profile pics of my SQ and H&R promptly sent me -1 springs for the front. Fitment is now perfect.

stanbSQ5

Thanks for info will contact ecsTuning

CORS6

Need measurement on H&R sport spring install on 3.0T

After pics in the thread

stanbSQ5

I saw that looks good. By any chance did you think what about y he shocks because basictly -1 says for q5. And -3 for sq5. Besides the height issue. Don't you think the sq5 shocks are different then the regular q5 and would conflict later on down the road

RUSSQ

Oh man, this sucks. I received the -3 springs last week (still waiting on my 15 SQ5). I'm not looking to drop 1.5", was hoping based on specs from ECS that these -3 springs would provide a 1" drop to front and .8" drop in rear. Are you guys saying those specs are not accurate?

stanbSQ5

I called H&R already the right springs are the -3 and basically the gap might be lower in rear but the chassis would be correct that's what they telling me I know people want the gap to look even but is not the gap that should look even is the actual car it's self from the floor so I think I'm just gonna stay with the -3 because they tested those in Germany and are govt. Approved for the sq5. So it comes down to if you want it lower and gap to look same go with the -1 if you want the correct springs is the -3