Q5/SQ5 MKI (8R) Discussion Discussion forum for the First Generation Audi Q5 SUV produced from 2008 to 2017

Humm May have to find a sollution for the bumper

Thread Tools
 
Search this Thread
 
Old 03-13-2011, 02:02 PM
  #1  
AudiWorld Expert
Thread Starter
 
Reggie's Avatar
 
Join Date: Mar 2000
Location: Fort Collins Colorado
Posts: 31,634
Received 41 Likes on 33 Posts
Default Humm May have to find a sollution for the bumper

I noticed that the top of the bumper is starting to get scratches from luggage and ski equipment. Even though that area is waxed well I we tried to keep items off it. The RX300 put a rubber mat on top of the bumper in our Model year 01' - I may look at purchasing one to see how it looks on the car (I had to replace that strip last year as ours cracked after nine years)
Old 03-13-2011, 04:04 PM
  #2  
AudiWorld Member
 
1atlas's Avatar
 
Join Date: Apr 2009
Posts: 227
Likes: 0
Received 0 Likes on 0 Posts
Default

Audi has a clear strip you can put on. I have it but have not intalled it yet. You can also do a rear bumper wrap with a clear film like they do on front bumpers. If do the whole bumper it would be hard to tell and offer some protection.
Old 03-13-2011, 06:24 PM
  #3  
AudiWorld Member
 
billypete's Avatar
 
Join Date: Mar 2010
Posts: 224
Likes: 0
Received 0 Likes on 0 Posts
Default

Do the whole bumper in clear bra material. I used the Audi strip and even tho it works it seems to be a dirt magnet also.
Old 03-14-2011, 04:54 AM
  #4  
AudiWorld Senior Member
 
HaveBullDogWillTravel's Avatar
 
Join Date: Aug 2009
Location: Chesapeake, VA
Posts: 1,091
Likes: 0
Received 1 Like on 1 Post
Default

Put "Audi" clear strip on mine and it works perfectly.
Old 03-14-2011, 05:19 AM
  #5  
Audiworld Junior Member
 
palumbo3284's Avatar
 
Join Date: Oct 2010
Location: Greater Philadelphia, PA Area
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by HaveBullDogWillTravel
Put "Audi" clear strip on mine and it works perfectly.
I did the same thing, and it works well...dog jumping in and out, boxes, groceries, etc...

I do wish I could have purchased a metal one that matched the aluminum trim and actually went over the bumper lip alittle... Had it on my Murano, and it was stylish and functional...eh well
Old 03-14-2011, 05:54 AM
  #6  
DrV
AudiWorld Senior Member
 
DrV's Avatar
 
Join Date: May 2009
Location: Nova Scotia
Posts: 861
Likes: 0
Received 0 Likes on 0 Posts
Default

I had to remove my clear strip after a year. It became yellow and obvious, not sure why, I assume from road salt, UV light and car washing.

Someone once posted a picture of a chrome protecting strip that covers the lip of the bumper as well. Might be worthwhile to search for that . . .
Old 03-14-2011, 06:35 AM
  #7  
AudiWorld Member
 
fonseca_Q5's Avatar
 
Join Date: Apr 2009
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts
Default

I have a blanket that I keep in the back and I simply let it hang down over the bumper anything I am loading or unloading anything.
Old 04-23-2011, 05:59 PM
  #8  
AudiWorld Newcomer
 
xequals0's Avatar
 
Join Date: Jul 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

i found a seller in germany that sells the stainless steel one.

http://www.audituningmag.com/audi-q5...tion-from-jms/
Old 04-23-2011, 07:00 PM
  #9  
AudiWorld Member
 
edwyun's Avatar
 
Join Date: Apr 2009
Location: NY/NJ, USA
Posts: 482
Received 4 Likes on 4 Posts
Default

Originally Posted by Reggie
I noticed that the top of the bumper is starting to get scratches from luggage and ski equipment. Even though that area is waxed well I we tried to keep items off it. The RX300 put a rubber mat on top of the bumper in our Model year 01' - I may look at purchasing one to see how it looks on the car (I had to replace that strip last year as ours cracked after nine years)
I've been looking for a solution to this too. The 3M clear just doesn't cut it. Rubber, Silicone, or Aluminum would be best.
Old 04-23-2011, 08:18 PM
  #10  
AudiWorld Member
 
GaryZ's Avatar
 
Join Date: Nov 2009
Posts: 50
Received 3 Likes on 3 Posts
Default

Originally Posted by xequals0
i found a seller in germany that sells the stainless steel one.

http://www.audituningmag.com/audi-q5...tion-from-jms/
Thanks for the info! I tried to place an order at jms-fahrzeugteile.de, but they are not quoting shipping costs to US even at the last step. Kinda scared to place the order because I don't want any surprises on shipping, like almost the same as the item itself...


Quick Reply: Humm May have to find a sollution for the bumper



All times are GMT -8. The time now is 02:45 AM.