drx2

I just upgraded to an iPhone 6 and have noticed some strange behavior with my 2013 Q5. I was hoping it was poor reception but I would make a call and after 10-20 seconds (approximately) the audio would stop coming through the car speakers. Then when the call dropped the MMI kept showing the call was in progress. The MMI locked up and would not respond when I hit all the different buttons to end the call. I could go to nav media etc and they all worked fine. Even after restarting the car, un-pairing, re-pairing the phone, forgetting the device on the phone and upgrading to iOS 8.0.2, the MMI still gets stuck in "call in progress" mode without the possibility to do anything besides disconnect Bluetooth. I can still stream podcasts.

Any suggestions? Am I missing something here?

Thanks for your help

spijun

Known problems with the new iOS
Try to reset all settings on MMI

uberwgn

....and reset network connections on the telephone.

spijun

+1

monkeydust

Users have said the Bluetooth problems have been fixed in iOS 8.1 that is currently in testing.

rorischak

considering our Q is a 2010 i am concerned about upgrading to IOS 8 and it not working properly. As of now it works well.

spijun

Problem is iOS8:

iOS 8 Causing Widespread Bluetooth Connectivity Issues in Cars - Mac Rumors
iOS 8 Troubles Continue. iPhones Hit By Bluetooth Problems - Forbes
Some iOS 8 users experiencing Bluetooth connectivity issues in cars and some devices
iOS 8 woes continue with Bluetooth problems | News | TechRadar

jensyl

Try a hard reset on the phone (home and power buttons pressed together till Apple logo comes on.....

tchar318

I have a 2010 Q5 and upgraded it IOS8 and it works just fine.

Barraged

Be careful when resetting the iPhone as it will delete all of your data in the cloud...