Driver and passenger airbag delete detailed...
07-15-2009, 08:59 PM
#15
AudiWorld Member
Join Date: Jul 2009
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Great write up - i will not be removing my seats but have the same problem - airbag light. I have been told the fault code is "side airbag igniter. Passenger side". Can someone please post some step-by-step instructions on how to get to the connection/wires and any indication on which ones are the most important or likely to be loose and cause the light to come on? Thanks !!!
06-21-2016, 12:32 AM
#17
AudiWorld Member
Join Date: May 2000
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Would wire color code differ between RHD and LHD?
"If anyone is looking closely, he'll notice that the harness wires are green/white in the first and last harness/resistor pic's and blue/white in the pictures with my beautifully manicured, scar-free fingers. The green/white was the driver's side, blue/white the passenger's . . ."
Would green/white be driver's side (right side in UK/OZ), or driver's left, depending on the market?
Would green/white be driver's side (right side in UK/OZ), or driver's left, depending on the market?
05-30-2020, 12:25 PM
#18
AudiWorld Newcomer
Join Date: May 2020
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
S4 seats
I know this is old but I thought I would take a chance, I have S4 seats going into my 96 A4. I just wanted to clarify that instead of sweating the air bag connections (my 96 did not have air bag seats) do I even need to run the wires for the air bags at all, and if so, can I just use a resistor? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
back2black
S4 / RS4 (B5 Platform) Discussion
11
03-19-2004 02:50 PM
