"No response from controller"
#11
Re: Bingo!
OK, thanks for the help so far. I've installed 311.2 and SAME ERROR!! Here's the test results:
COM Port Status: OK
Interface Status=0-found, ready
Fast-Synch compatible: NO
Again, when I choose any control module, VAG-COM tries 4 times and then reports: NO RESPONSE FROM CONTROLLER.
What should I do now?
COM Port Status: OK
Interface Status=0-found, ready
Fast-Synch compatible: NO
Again, when I choose any control module, VAG-COM tries 4 times and then reports: NO RESPONSE FROM CONTROLLER.
What should I do now?
#12
Re: Just download and install 311.2. It should overwrite 409.1.
OK, thanks for the help so far. I've installed 311.2 and SAME ERROR!! Here's the test results:
COM Port Status: OK
Interface Status=0-found, ready
Fast-Synch compatible: NO
Again, when I choose any control module, VAG-COM tries 4 times and then reports: NO RESPONSE FROM CONTROLLER.
What should I do now?
COM Port Status: OK
Interface Status=0-found, ready
Fast-Synch compatible: NO
Again, when I choose any control module, VAG-COM tries 4 times and then reports: NO RESPONSE FROM CONTROLLER.
What should I do now?
#14
Re: Sounds like it's time to contact your 3rd party Interface supplier.
GOT IT WORKING!! I reinstalled 311.2 and disabled LIFO plus lowered the baud rate AND figured out that the serial port is actually COM 1 on my Dell, not COM 3 as I originally thought (this is actually the modem).
And, voila...
Thanks for your help!!
And, voila...
Thanks for your help!!
Thread
Thread Starter
Forum
Replies
Last Post
Andy_FL
VAG-COM Discussion
4
03-04-2009 04:04 AM
branshew
A4 (B5 Platform) Discussion
2
06-02-2006 10:43 AM
3112, a5, audi, b5, contloler, contriller, controller, interfaces, no, optocouplers, response, s4, serial, vag, vagcom