2004 A8L Level Control Adaptation issues
#1
2004 A8L Level Control Adaptation issues
Hello,
I can try to explain this and hopefully someone knows what i'm talking about and knows the issue. Basically I tried to lower my A8L with Vag-Com (Air baby!) and it essentially threw up on itself and errored out (I'm to blame because I tried to lower it way lower then the max amount of... I think 25mm... I was going for 50mm)... Anyways I figured the best thing would be to put it back to stock height and go from there... So I followed the Ross Tech procedure for recalibrating the system and when I get to channel 05 (the save channel) it says its not available or invalid or something along those lines. so I can't save the new values and reset the system. Has anyone had this issue and was able to fix it? I logged it as well:
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.2.0
Data version: 20140212
--------------------------
Adaptation Channel 005:
Stored value
ERROR:
Channel 05
Not
Available
So ya any help would be appreciated... I've tried another ross tech cable and 3 other laptops just to weed out any questions about the hardware.
I can try to explain this and hopefully someone knows what i'm talking about and knows the issue. Basically I tried to lower my A8L with Vag-Com (Air baby!) and it essentially threw up on itself and errored out (I'm to blame because I tried to lower it way lower then the max amount of... I think 25mm... I was going for 50mm)... Anyways I figured the best thing would be to put it back to stock height and go from there... So I followed the Ross Tech procedure for recalibrating the system and when I get to channel 05 (the save channel) it says its not available or invalid or something along those lines. so I can't save the new values and reset the system. Has anyone had this issue and was able to fix it? I logged it as well:
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.2.0
Data version: 20140212
--------------------------
Adaptation Channel 005:
Stored value
ERROR:
Channel 05
Not
Available
So ya any help would be appreciated... I've tried another ross tech cable and 3 other laptops just to weed out any questions about the hardware.
Thread
Thread Starter
Forum
Replies
Last Post
Der Kimbo
A8 / S8 (D3 Platform) Discussion
18
11-19-2005 08:33 AM
liz
Audi 90 / 80 / Coupe quattro / Cabriolet
1
09-22-2002 06:37 PM