Auto HVAC VAG-COM access '00 A6 2.7t
#1
AudiWorld Member
Thread Starter
Join Date: Feb 2006
Location: East Coast
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Auto HVAC VAG-COM access '00 A6 2.7t
When I try to access the Auto HVAC module wit my VAG-COM (V409.1), I get multiple comm errors reported and it dumps me out.
I do suspect the climate control unit is bad/flaky.
Should I be able to address the climate control module OK with the VAG-COM? All other modules seem fine.
tks! Michael
I do suspect the climate control unit is bad/flaky.
Should I be able to address the climate control module OK with the VAG-COM? All other modules seem fine.
tks! Michael
#5
AudiWorld Senior Member
Join Date: Jun 2004
Location: Magdeburg, Germany
Posts: 1,675
Likes: 0
Received 0 Likes
on
0 Posts
The fact that other modules work fine has nothing to do with this particular module...
...we've seen more than one case where people had problems like you - always with generic/3rd party hardware. There is no problem known in combination with Ross-Tech KEY/HEX interfaces.
You may want to check these FAQ points too...<ul><li><a href="http://ross-tech.com/vag-com/faq_2.html#2.4">http://ross-tech.com/vag-com/faq_2.html#2.4</a</li></ul>
You may want to check these FAQ points too...<ul><li><a href="http://ross-tech.com/vag-com/faq_2.html#2.4">http://ross-tech.com/vag-com/faq_2.html#2.4</a</li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
John/Jmess5
Audi 100 / A6 (C4 Platform)
7
11-13-2005 06:33 PM