Defective bulb recognition delete?
#1
AudiWorld Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Defective bulb recognition delete?
MY 2005.5 AUDI S4.
I swapped out some different bulbs for the city lights & DRL's, but now the dash displays that several bulbs are out. I understand that the new bulbs are lower resistance, and I could splice in resistors to eliminate the warnings, but I wanted to see if there was a way to re-code something to eliminate these warnings? I hate splicing into factory wiring...
I did some snooping for re-coding control modules, & found one for side markers but the module wouldn't accept the new code. If you need any further information to help me out just ask, TIA!
I swapped out some different bulbs for the city lights & DRL's, but now the dash displays that several bulbs are out. I understand that the new bulbs are lower resistance, and I could splice in resistors to eliminate the warnings, but I wanted to see if there was a way to re-code something to eliminate these warnings? I hate splicing into factory wiring...
I did some snooping for re-coding control modules, & found one for side markers but the module wouldn't accept the new code. If you need any further information to help me out just ask, TIA!
#2
I don't think there's any way to do that with a scan tool.
__________________
http://www.Ross-Tech.com
http://www.Ross-Tech.com
Thread
Thread Starter
Forum
Replies
Last Post
absoluteis
RS4 (B7 Platform) Discussion
7
08-24-2007 07:25 AM
sparkhill
RS4 (B7 Platform) Discussion
0
06-29-2007 07:37 AM
Eddie Man
S4 (B6 & B7 Platforms) Discussion
10
11-14-2006 10:44 PM
Dr.Duct_Mossburg
S4 / RS4 (B5 Platform) Discussion
12
01-03-2006 08:43 PM