CtrlAltDel

I was going to lower my Q7 and when reading the current settings per: http://www.ross-tech.com/vag-com/cars/levelcontrol.html
I started getting the MIL on and the following codes under Controller 34:
Saturday,03,August,2013,15:55:03:49116
VCDS Version: Beta 12.10.6

Address 34: Level Control Labels: None
Control Module Part Number: 4L0 910 553 J HW: 4L0 907 553 E
Component and/or Version: LUFTFDR.-CDC H04 7860
Software Coding: 0015520
Work Shop Code: WSC 31414 790 00001
VCID: 31629F7EA896869632B
1 Fault Found:

01437 - Control Position not Learned
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 11100101
Fault Priority: 2
Fault Frequency: 1
Reset counter: 78
Mileage: 30252 km
Time Indication: 0
Date: 2013.08.03
Time: 15:54:22

Freeze Frame:
Error Code: 6

I ran through the suspension calibration steps. Manually clear the error code, yet it still comes back. Anyone seen this before or have any suggestions? Thanks

CtrlAltDel

RTFM, I missed setting channel 5 correctly, (1), and it worked like a champ.