JonH59

Hello all. Long time lurker here and what I want is a spare tire/wheel for when I work on my 2015 Q7. If I take a tire off and fuss with it for a while, I would much rather have the car sitting on the ground - ESPECIALLY if I happen to leave home.

SO...solution is to visit a junkyard and grab a wheel - ANY wheel - that will fit my Q. So after reading 10 pages here and getting dizzy, I thought I'd just ask the smart guys. What wheel will fit? After lots of reading, what I've found is a bore of 66.5mm and a lug pattern of 112mm (5 lugs).

UNTIL....I found a couple sites that say my Q has a pattern of 130mm.

And just when I thought I would cruise in to the junkyard and ask for ANY Audi wheel....

Please discuss....

Thanks in advance,
Jon in American Fork

Doc@tirerack

In terms of finding "any" Audi wheel, it would have to be off another Q7 (5x130), as Audi uses 5x112 on Q5, Q3 and (mostly) everything else. To that end, only "take off" wheels from late model Touareg and Cayenne will work.

JonH59

Doc,
Thanks for the wheel info and lesson. Now I know what to look for when I visit the junkyards.

Jon in American Fork

LonesomeDave

Is the center bore the same for the 5x130 as it is for the 5x112? thx in advance.

dreadlocks

Porsche Cayenne and Volkswagen Touareg wheels are the same bolt pattern, offset and center bore, the new MK2 Q7 uses a completely different bolt pattern so not just ANY Q7 will fit.

I'm rocking Cayenne wheels on my Q7, have to be at least 18in to clear the brakes.

LonesomeDave

Thx Dreadlocks! I guess that means the 71 bore hole. I'm wanting to trade my my 21x10 rims (and tires) for a set of 20's if anyone is interested. I have and like the the 5 triple spoke in Charcoal. I just stumbled on this site so I'll have to look and see if there is a for sale/parts etc section.