1,8T AGU swap
09-03-2017, 11:27 PM
#1
AudiWorld Newcomer
Thread Starter
Join Date: Sep 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
1,8T AGU swap
Hi, sorry, my English is not good.
I have a engine 1,8T AGU in an old car.
everything worked. 0,5-0,6bar at 110kW - OK
I made the chip on 132kw and slowly ceased to blow from 1bar to 0.4bar.
fuel pressure, N75, injectors, MAF senzor, lambda, turbo, Air pipes is OK. The engine behaves normally, no tearing.
I do not have ABS and speed sensor, that displays an error. Can it be because of speed senzor? Thanks
I have a engine 1,8T AGU in an old car.
everything worked. 0,5-0,6bar at 110kW - OK
I made the chip on 132kw and slowly ceased to blow from 1bar to 0.4bar.
fuel pressure, N75, injectors, MAF senzor, lambda, turbo, Air pipes is OK. The engine behaves normally, no tearing.
I do not have ABS and speed sensor, that displays an error. Can it be because of speed senzor? Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Audeye A6
1.8T Discussion
3
10-27-2007 11:18 PM
S6 4RiNGS
Audi Original "S" Cars
1
03-10-2005 08:26 PM