a4 hazards keep flashing
04-30-2015, 05:46 AM
#1
AudiWorld Newcomer
Thread Starter
Join Date: Apr 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
a4 hazards keep flashing
Hello guys I have an a4 that has been giving me hell for the past few months. Audi A4 b6 1.8lt 2002 quattro. The hazard lights keep flashing and I really need the car to be up and running soon! Fault codes are as followed:
Check engine light "ON" , ABS, traction, BRAKE, Hazard, Key or Alarm all lights on.
P1626 Missing msg from TCU
P1912 Pressure sensor for brake boost (G299)
P1492 Circuit for brake vacuum pump
P1602 Terminal 30:Voltage too low
P0300 Mass Air Flow Too High
sensor for steering angle (G85) Supply Voltage 01826 P1647/P1850
Any help would be greatly appreciated as I have not had a car for 5 months and would love for my A4 to work again ...thanks in advanced!!!
Check engine light "ON" , ABS, traction, BRAKE, Hazard, Key or Alarm all lights on.
P1626 Missing msg from TCU
P1912 Pressure sensor for brake boost (G299)
P1492 Circuit for brake vacuum pump
P1602 Terminal 30:Voltage too low
P0300 Mass Air Flow Too High
sensor for steering angle (G85) Supply Voltage 01826 P1647/P1850
Any help would be greatly appreciated as I have not had a car for 5 months and would love for my A4 to work again ...thanks in advanced!!!
Thread
Thread Starter
Forum
Replies
Last Post
Abcaudi
Audi allroad
12
07-28-2023 10:25 AM
Pelican Pete
A4 (B5 Platform) Discussion
11
07-22-2005 11:33 AM
amirsafdari
A4 (B6 Platform) Discussion
6
01-25-2004 11:08 AM
Rando
A4 (B5 Platform) Discussion
5
03-25-2003 05:20 PM