Variable intake actuator
#1
Variable intake actuator
Hi all, new to both the forum and Audi ownership.
I have a A6 C6 4.2 FSI, and I've been getting intermittent CEL with codes 2015 and 2020. If I clear the codes, the CEL only comes back on when the engine is started from completely cold (on a warmer day it doesn't always come on from cold start). I've seen the very helpful thread https://www.audiworld.com/forums/a8-...codes-2870358/
As it seems intermittent, I was thinking along the lines of;
Does this sound like a sensible approach? Also, are there any guides to changing the actuator (if it comes to that)?
Thanks in advance for any help.
I have a A6 C6 4.2 FSI, and I've been getting intermittent CEL with codes 2015 and 2020. If I clear the codes, the CEL only comes back on when the engine is started from completely cold (on a warmer day it doesn't always come on from cold start). I've seen the very helpful thread https://www.audiworld.com/forums/a8-...codes-2870358/
As it seems intermittent, I was thinking along the lines of;
- Lubricate the linkages from the actuator to the 2 flap sensors
- Then if the CEL still comes on, replace the actuator
Does this sound like a sensible approach? Also, are there any guides to changing the actuator (if it comes to that)?
Thanks in advance for any help.
Thread
Thread Starter
Forum
Replies
Last Post
Joshua Burts
A6 / S6 (C6 Platform) Discussion
4
09-27-2018 09:38 AM
Mister Bally
A8 / S8 (D3 Platform) Discussion
4
12-08-2013 06:54 PM
Turkeybaster115
A6 / S6 (C6 Platform) Discussion
6
04-21-2012 09:23 PM