Ahh...
#1
Ahh...
<center><img src="http://img.photobucket.com/albums/v673/Rosati/TBwentwrong.jpg"></center><p>The intake valves were bent sideways
The exhaust valves came unseated and are stuck open
These pics were taked before the head and/block had a once over so its pretty dirty
The cylinder heads came pretty clean and the deposits were cleaned up pretty well w/ the cloth and dont look as bad now. But cyl 1 has 2 small scratches on the cyl head and im worried i did it by accident
The head is at the shop and im waiting on the valves to come in , will be pickin up valve seals tom.
Cylinder walls are in pretty good condition
The exhaust valves came unseated and are stuck open
These pics were taked before the head and/block had a once over so its pretty dirty
The cylinder heads came pretty clean and the deposits were cleaned up pretty well w/ the cloth and dont look as bad now. But cyl 1 has 2 small scratches on the cyl head and im worried i did it by accident
The head is at the shop and im waiting on the valves to come in , will be pickin up valve seals tom.
Cylinder walls are in pretty good condition
#2
AudiWorld Uber User
Is this what happens when you don't change the timing belt?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Joey T
A4 (B5 Platform) Discussion
15
12-28-2006 05:28 AM
UrSoccer_mobileĀ®
Audi 90 / 80 / Coupe quattro / Cabriolet
26
01-20-2005 01:47 PM
RoninTT
Performance and Tuning
10
07-12-2004 01:05 PM