E code HID Help
Thread Starter
New Member
Joined: Nov 2002
Posts: 10
Likes: 0
E code HID Help
I have a 98 2.8. I just purchased one piece E code HID housings, OEM ballasts and bulbs. I currently have the 2 piece halogen headlights. Can anyone help me with this mod, mostly the wiring. Does anyone know a shop in NY area that might help? Thanks...
AudiWorld Member
Joined: Jun 2002
Posts: 513
Likes: 0
Just did the same. Here is a list of parts from dealer
Here is a list of the parts needed to install later model electrical connectors. I also had issues with my turn signal bulb holders fitting into the one-piece housings. I had to dremel away one of the three tabs on the bulb holder to get them to fit, but you may want to get the correct bulb holders from the dealer/ junk yard.
8D0 973 734 Electrical connector housing to headlight> Quantity of 2
000-979-225 Single conductor wire with proper electrical contact crimped on each end (plugs into housing). Cut in half and 1=2. Quantity of 3 needed to complete the job.
I paid about $21.00 for all of the above. BTW, the rubber boot over your existing connectors will fit the new (oval)connectors. The wiring info can be found in the tech section.
8D0 973 734 Electrical connector housing to headlight> Quantity of 2
000-979-225 Single conductor wire with proper electrical contact crimped on each end (plugs into housing). Cut in half and 1=2. Quantity of 3 needed to complete the job.
I paid about $21.00 for all of the above. BTW, the rubber boot over your existing connectors will fit the new (oval)connectors. The wiring info can be found in the tech section.
Thread
Thread Starter
Forum
Replies
Last Post
ThirdEye
A4 (B5 Platform) Discussion
7
Jan 11, 2003 10:48 PM
