Koni height and damper adjustable coilover for sale
04-10-2002, 08:14 AM
#1
New Member
Thread Starter
Join Date: Feb 2002
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Koni height and damper adjustable coilover for sale
After debating for a couple of days...
I have decided to part out my Koni adjustable coilover (height and damper) after putting on my car (S4) for a couple of days...
Ride is not firm enough for me...
It is compatible to A4s according to Koni's site and a couple of users are using them for their 1.8T A4s
I am asking for $1100US shipping included (parts no 1150-5019). Will post picture this weekend.
Nice day!
I have decided to part out my Koni adjustable coilover (height and damper) after putting on my car (S4) for a couple of days...
Ride is not firm enough for me...
It is compatible to A4s according to Koni's site and a couple of users are using them for their 1.8T A4s
I am asking for $1100US shipping included (parts no 1150-5019). Will post picture this weekend.
Nice day!
04-10-2002, 08:26 AM
#3
New Member
Thread Starter
Join Date: Feb 2002
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: uhmm, these parts are new around $800+. Good luck.
Hmmm. Someone told me that...
But tirerack told me they are for 1500 shipped, where can you get @ that price?
Thx
Sure the right part number?
But tirerack told me they are for 1500 shipped, where can you get @ that price?
Thx
Sure the right part number?
04-10-2002, 08:35 AM
#4
I only remember the last 4 digits, the 5018, 5019 which is the spring number difference.
I got mine (1st users of the Koni) in July of '99 for $875 from Shox.com I think with shipping only added around $50 or less. I have te 5019. Since then I have seen prices fluctuating from high $700's to mid $900's.
$1500 can get you a custom valve dual adj Koni and matching linear rate Eibach springs from oops, can't reveal
$1500 can get you a custom valve dual adj Koni and matching linear rate Eibach springs from oops, can't reveal
04-10-2002, 08:37 AM
#5
New Member
Thread Starter
Join Date: Feb 2002
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: I only remember the last 4 digits, the 5018, 5019 which is the spring number difference.
IC... then tire rack must be selling @ a huge premium then...
They claim there's one app for my car and that's the no. and 1500 shipped is what they quoted...
They claim there's one app for my car and that's the no. and 1500 shipped is what they quoted...
04-10-2002, 08:50 AM
#7
New Member
Thread Starter
Join Date: Feb 2002
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: I only remember the last 4 digits, the 5018, 5019 which is the spring number difference.
That's equally bad... I believe that H&R should be similar priced to the Konis... you may ask Audiboy for more info... Are they really overpriced? Or is there so much mispricing on the market in general?
Trending Topics
04-10-2002, 09:08 AM
#8
H&R's always cost a bit more than the Koni's even back in '99 when I was looking. At least over 20%
more. They have different levels of springs upgrades (struts are similar over a wide range). However, I have seen a bit too many busted H&R's cartridges - and I hope people who have them check to see if theirs are ok - because most people don't know how it feels like. Check for lots of oil around the shock area. Konis on the other hand, the only one that broke after about 8 sets I've seen or installed was a bad adjuster on the rear shock preventing the rebound to be adjusted. Replaced by Koni NA (North America) free anyway - Koni NA is very helpful.
Thread
Thread Starter
Forum
Replies
Last Post
vrsix
S4 / RS4 (B5 Platform) Discussion
4
01-13-2006 01:59 PM
DABearS4
S4 / RS4 (B5 Platform) Discussion
2
08-09-2002 02:28 PM
soldmym3
S4 / RS4 (B5 Platform) Discussion
6
04-10-2002 11:00 AM