Someone Please Help!!!!!!!!!!!!

Reply Subscribe

Thread Tools

Search this Thread

Apr 25, 2003 | 01:54 PM

dankg

Thread Starter

New Member

Joined: Sep 2002

Posts: 36

Likes: 0

Someone Please Help!!!!!!!!!!!!

Hello. I have been having a little trouble with my 98 audi a4's turbo. I had a Wett. chip installed and since then, my turbo periodically turns down. The boost normally is around 10-14 psi, but when this happens it turns down to 4 or 5 psi. It does it almost everytime I drive, but it goes back and forth. If anyone has any info. on this please let me know.
Thanks.

Apr 25, 2003 | 01:59 PM

SuckerPunch

Junior Member

Joined: Feb 2002

Posts: 1,098

Likes: 0

try oxy sensor before the cat ot the bypass valve

Apr 25, 2003 | 02:02 PM

dankg

Thread Starter

New Member

Joined: Sep 2002

Posts: 36

Likes: 0

Re: try oxy sensor before the cat ot the bypass valve

thanks, i'll try those.

Apr 25, 2003 | 02:06 PM

SuckerPunch

Junior Member

Joined: Feb 2002

Posts: 1,098

Likes: 0

did it throw a code

u might want to vag it before u spend the $130 on the sensor and the BPV

Apr 25, 2003 | 02:09 PM

dankg

Thread Starter

New Member

Joined: Sep 2002

Posts: 36

Likes: 0

Re: did it throw a code

I recently had it in the shop for a check engine light. they checked the codes and never said anything about it. I will check again though.

Apr 25, 2003 | 02:12 PM

SuckerPunch

Junior Member

Joined: Feb 2002

Posts: 1,098

Likes: 0

get the code number and post it here,

someone can better point You in the right direction

BTW I have the Bently manual that tells you what to look for with each code as well as a vag-com, well worht the $300 IMO