timing question
Thread Starter
AudiWorld Uber User
Joined: May 2000
Posts: 42,781
Likes: 0
timing question
Once i get the cyl head rebuilt, and get my tbelt kit from ECS how do i align the pulleys so that timing will be correct? If i read the bently cd correctly i put cyl 1 at TDC and align the cam pully with some mark on the cam cover? can anyone confirm this?
AudiWorld Super User
Joined: Aug 2003
Posts: 5,209
Likes: 0
both pulleys have tdc marks...cam is easier to see, crank requires
making mark on the block since the cover comes off. After you install the new tb, just handcrank clockwise to two full revolutions just to make certain everything lines up.
AudiWorld Senior Member
Joined: Jun 2002
Posts: 1,210
Likes: 0
There is a mark up top that everyone talks about but...
<center><img src="http://www.pbase.com/rookie18/image/29582546.jpg"></center><p>there is also a mark on the lower pully but you need to put the lower timing belt cover on. See picture...<ul><li><a href="http://www.pbase.com/rookie18/timing_belt&page=all">Pictures</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
