Few Pics
#1
Audiworld Junior Member
Thread Starter
Join Date: Dec 2007
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Few Pics
Just wanted to share some pics since I didn't post for a while.
To come:
DTM bumper being painted this week
Finishing the Tailights LED setup
As usual, comments are welcome
To come:
DTM bumper being painted this week
Finishing the Tailights LED setup
As usual, comments are welcome
#2
Wow! Nice pics!
Until I realized it was just the lighting in the first one, I thought purple & gold was a bit much.
The wheels aren't my thing, but it works together nicely. Are they 19"s? What's the ride height? Does it scrape? (since I'm wondering how much lower I could go.)
The wheels aren't my thing, but it works together nicely. Are they 19"s? What's the ride height? Does it scrape? (since I'm wondering how much lower I could go.)
#5
Audiworld Junior Member
Thread Starter
Join Date: Dec 2007
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
F = 235/35/19
R = 265/30/19
Not really sure about the height (I never really checked when I installed the coils). I am able to run 265's on the rear because I have modified the rims (dressed the inner face in the machine shop) and no, no rubbing
#6
Audiworld Junior Member
Thread Starter
Join Date: Dec 2007
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
#7
can't wait... got a rough estimate on the cost? if it's not too bad i'll jump on this ASAP. it's such a nice and clean upgrade
Trending Topics
#8
Audiworld Junior Member
Thread Starter
Join Date: Dec 2007
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
There will be 2 solutions: Number one, you will get a kit with all the 4 supports assembled plus circuit boards. You will have to open the tails yourself but a DIY will be provided. This solution will be below $400 for the entire chipset + shipping. Number 2, you send me your 4 taillights, I inspect them for damage and if none, I will overnight a replacement set already equipped with the leds. You will just have to run an additional wire to activate the stop lights on the trunk side and install the 2 circuit board. No price available yet for this solution