UrKurt

This writeup was specific to the new harness, though the old is similar. Take a look at <a href="http://www.audizine.com/forum/showthread.php?t=118615&highlight=kufatec+pins+har ness">this post on Audizine by Quattro4Image</a>.

As for recoding, see this as a reference for Central Electronics / Module 9:
<a href="http://wiki.ross-tech.com/index.php/Audi_A4_%288E%29_Central_Electronics_%288EC/8ED%29">Link to Ross-Tech Wiki</a>

what you want to do is the coding for this module from xxx0x (halogens, no drls) or xxx1x (halogens, drls) to xxx3x (bi-xenons, no drls) xxx2x (bi-xenons, drls)

Good luck!

maxpistoia

hello,
I have a problem coding on #09 central electonics:
dan't accept the xenon activation.
now it's coded 10001. when I put 10021 they accept, but not save, at the reload infact the 10001 remains.

I' ve a A4 B7, 2005, european, with 8E0 907 279 K

I try also 10031 with the same results.
xenon are 8e0 941 003 and 4 AM, retrofit.
I have also just connected the two pins of the kufatech cable adaptor on the module.

xenon lights, but sometimes one lamp go down, and if I highlight the daylights flash.

no errors on the #09 and others.

Kid Red

I followed this walkthrough and I can't get the hi-beams to function. Anyone has any ideas? I wried to 21 and 22 and VAG-ed for Bi-Xenons.