suspension height of stock 2.0T
#1
suspension height of stock 2.0T
Preparing to install Streetsport coilovers, I measured the distance between the center of the wheel and the fender: 15.5" in front and 15" in back...in other words, a negative rake of 1/2". Is this typical?
Stasis recommends 13.5" after installation, with a 1/8" rake. They say this normally means a drop of 1 1/4", but on my car that would be a 2" drop front and a 1 1/2" drop in back. Am I missing something?
Stasis recommends 13.5" after installation, with a 1/8" rake. They say this normally means a drop of 1 1/4", but on my car that would be a 2" drop front and a 1 1/2" drop in back. Am I missing something?
#2
Koni doesnt want them lower than 25" front and rear, so go 25 1/8 rear, 25 front...
fender to floor. Unfortunately there is a design issue with the new Koni/Stasis streetsports that prevents this. They are attempting to address it now. cheers! Mike
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning-Audi
A4 (B8 Platform) Discussion
21
09-11-2021 04:04 PM
bilbo6209
A6 / S6 (C5 Platform) Discussion
0
09-09-2015 01:28 PM
ECS Tuning-Audi
A4 (B7 Platform) Discussion
0
09-01-2015 09:16 AM
ECS Tuning-Audi
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
0
09-01-2015 08:27 AM