Halogen to Bi Xenon 2010 A4 Parts??
#1
Halogen to Bi Xenon 2010 A4 Parts??
I've searched and with no luck to the following, I understand that LowestA4 doesn't sell anymore pre facelift bi xenon kits, so now I'm left to try to put everything together, so far this is what I know I need:
http://www.ecstuning.com/Audi-B8_A4-...hts/ES2500754/
or
http://www.ecstuning.com/Audi-B8_A4-...hts/ES2500755/
http://www.ecstuning.com/Audi-B8_A4-...ghts/ES468909/
what else do I need ??
http://www.ecstuning.com/Audi-B8_A4-...hts/ES2500754/
or
http://www.ecstuning.com/Audi-B8_A4-...hts/ES2500755/
http://www.ecstuning.com/Audi-B8_A4-...ghts/ES468909/
what else do I need ??
#4
You'll also need ballasts, LED modules and wiring adapters. PM me, I have a pair of e-codes (right one is damaged and left one is in good condition) with everything except wiring adapter which you can pick up at www.kufatec.com. If you pick up a pair of housings from "ports" I can sell you ballasts, modules and bulbs.
#5
You'll also need ballasts, LED modules and wiring adapters. PM me, I have a pair of e-codes (right one is damaged and left one is in good condition) with everything except wiring adapter which you can pick up at www.kufatec.com. If you pick up a pair of housings from "ports" I can sell you ballasts, modules and bulbs.
#6
Trending Topics
#8
Right codes for the AK module
hello everyone,
just few days ago replaced on my A4 B8 2008 AVANT front halogen lights on to bi-xenon and also i had to change my BCM as the old one did not have the pins for the long beam lights.
Now since I replaced the standard BCM 8K0 907 063 on to 8K0 907 063 AK i had few problems. New module 8K0 907 06AK was not from AVANT version so I had to find out which byte was responsible for the rear window wiper motor. I did finally find it and the wiper with all LED-s and the low beam, flaps for the long beam works perfect.
Still don't understand why I havent got interior lights and all lights on the dash board are dimmed to maximum. I know that the module AK was fitted to the car with Switch for Night-Vision System.
Also the car with AK module was fitted with Switch for Head-Up Display and it had Control Module for Headlight Range (J431)
Can anyone help and advice me how can I disable the head up display, hedlight range, night vision system and how can I get back my over head interior lights??
the original coding from AK module:
260090118034AFC11701400000001D0D0F9D00082609014100 0000000001010100020000000000
any help would be much appreciate,
Regards,
spÓÓks
just few days ago replaced on my A4 B8 2008 AVANT front halogen lights on to bi-xenon and also i had to change my BCM as the old one did not have the pins for the long beam lights.
Now since I replaced the standard BCM 8K0 907 063 on to 8K0 907 063 AK i had few problems. New module 8K0 907 06AK was not from AVANT version so I had to find out which byte was responsible for the rear window wiper motor. I did finally find it and the wiper with all LED-s and the low beam, flaps for the long beam works perfect.
Still don't understand why I havent got interior lights and all lights on the dash board are dimmed to maximum. I know that the module AK was fitted to the car with Switch for Night-Vision System.
Also the car with AK module was fitted with Switch for Head-Up Display and it had Control Module for Headlight Range (J431)
Can anyone help and advice me how can I disable the head up display, hedlight range, night vision system and how can I get back my over head interior lights??
the original coding from AK module:
260090118034AFC11701400000001D0D0F9D00082609014100 0000000001010100020000000000
any help would be much appreciate,
Regards,
spÓÓks
Thread
Thread Starter
Forum
Replies
Last Post
slimcubby
A4 (B6 Platform) Discussion
2
06-01-2004 12:07 PM
chw6922
A4 (B5 Platform) Discussion
28
04-28-2003 04:01 AM
bonghit
A4 (B6 Platform) Discussion
7
10-15-2002 04:00 PM