Serotta b1kr

Could somebody with a prem + post the long coding values for both A5 front sensors and 17 Dashboard?

I get an error on the VC that stays on saying the pre-sense is limited, but on the obdeleven it only shows a fault on 17 Dashboard.

Thanks in advance for any help.

R8ready

is there any way of getting the S4 sport cluster (the speed/rpm gauge is in the middle with the info/map on the sides) on a tecknik A4?

Mitchfin

not really the correct thread for this. But short answer no. The VC is hard coded to he vin. A4 vin = A4 layout

rmur23

Does coding void warranty?


Also, does it always require an MMI reset? Meaning deletion of info such as stations, connected devices, settings etc?

dmahon

you probably need to search the forum - much discussion on both of these topics....

akifbayram

Is this possible on the 2018 Audi A5 / S5?

KevinB656

No.

I have coded a bunch of stuff with OBDEleven and my MMI settings have never been deleted.

rkane

I wanted to join the chorus of people thanking you for your work on this. Great job Mitchfin. It took me a while before I was willing to take the plunge but it all worked out swimmingly. I must say though that I wish it was easier to temporarily turn off Active Lane Assist and I wonder if the capacity to do that in the MMI could possibly be discovered at some point.

Also I'm wondering if there are any other coding solutions in the works for the B9 A4 that might appear at a later date.

Thanks again to Mitchfin and to everyone who has contributed to this forum.

DizzyA4

That would be awesome if you could turn it off and on in the MMI. I just did the one step coding change to disable it.

minmet

Would you share which one step coding change to disable it? Thanks in advance!