Wuplur

Sorry, was thinking lane assist not traffic sign.

strelec1234

I hawe tried to coding lane assist but didnt go i hawe 2 faults in 5f frontsensorik

Mitchfin

Want to post your coding for that module?

strelec1234

Mitchfin

I'm not sure what your issue is with the coding? Did you check all the bits that I outlined?

strelec1234

Yes 2 times..i hawe pre sense basic camera..i hawe coded high beam assist with no problem..i hawe car for europe..it must not hawe the buton to activate it or?do you hawe only pre sense camera or side assist sensors

Mitchfin

Try turning the on condition for lane assist in the 5F adaptations to on instead of select via MMI and turn the steering wheel warning to on and see if that activates it, if you could send faults that would be nice too.

strelec1234

Ok..i gona try tomorow..thank you for now..i hawe coded static cornering light for xenon lights if anybody interested...but now the all weather light dont work only one option you can hawe

gguy

I'm sorry guys, but I'm still confused so I am going to ask a couple of questions again that didn't get answered before.

First, I have Audi pre sense basic & city (which are standard on the PP+ or maybe just standard on all US A4's) and Audi Pre Sense Rear. Does that mean that I have the front facing camera?

Second, once activated, will lane assist only be able to be turned off by going in and doing the coding again to reset it to the original configuration or is there a switch or MMI toggle that will be available to turn it off or on?

Thanks.

Mitchfin

Yes it will work on your car, same as mine. And yes only disabled via coding.