Headlight swap to Full LED
#1
AudiWorld Senior Member
Thread Starter
Headlight swap to Full LED
Is this possible in terms of is it plug and play? Would it need to be re-coded on vagcom as well?
Has anyone done this?
Any info guys??
Has anyone done this?
Any info guys??
#3
I'm working with a forum member on this currently. He was going to purchase my previous full LED lights from me.
It is not plug and play. Coding is required. And since the LEDs use less power, you might need different relays/fuses.
I haven't fully mapped it out yet.
It is not plug and play. Coding is required. And since the LEDs use less power, you might need different relays/fuses.
I haven't fully mapped it out yet.
#4
AudiWorld Senior Member
Thread Starter
yeah, i was afraid of that. In the past, a lot of swaps on audi models just required a vag-com recode. In theory it could work on the B9, with a simple re-code, even given the lower wattage consumption of the LEDs, but i'm sure audi didnt make it so easy..
Keep us in the loop it will be interesting to see what it takes.
Keep us in the loop it will be interesting to see what it takes.
#5
Another hurdle I forgot to mention is the control and power modules. No longer are there separate part numbers for specific functions. With MLBevo, control modules are parameterized based on intended functionality. Think of these new control modules like a formatted hard drive, awaiting software. Parameterization installs the software necessary to accomplish the functions based on the vehicle's configuration in SVM. It won't allow for cross-functionality.
Currently, parameterization for all B9 lighting modules can only be accomplished using ODIS at an authorized workshop. And you'll go into a loop, because SVM doesn't show your vehicle having LED lights.
Currently, parameterization for all B9 lighting modules can only be accomplished using ODIS at an authorized workshop. And you'll go into a loop, because SVM doesn't show your vehicle having LED lights.
#6
AudiWorld Senior Member
@Widimagineer
Question, what about going from full LED in the US to the Matrix LEDs, would that be plug and play? I know they aren't legal in the US but just curious.
Question, what about going from full LED in the US to the Matrix LEDs, would that be plug and play? I know they aren't legal in the US but just curious.
#7
AudiWorld Senior Member
Thread Starter
Another hurdle I forgot to mention is the control and power modules. No longer are there separate part numbers for specific functions. With MLBevo, control modules are parameterized based on intended functionality. Think of these new control modules like a formatted hard drive, awaiting software. Parameterization installs the software necessary to accomplish the functions based on the vehicle's configuration in SVM. It won't allow for cross-functionality.
Currently, parameterization for all B9 lighting modules can only be accomplished using ODIS at an authorized workshop. And you'll go into a loop, because SVM doesn't show your vehicle having LED lights.
Currently, parameterization for all B9 lighting modules can only be accomplished using ODIS at an authorized workshop. And you'll go into a loop, because SVM doesn't show your vehicle having LED lights.
Trending Topics
#8
#9
AudiWorld Senior Member
Thread Starter
#10
AudiWorld Senior Member
Hell, when I was looking at audi.fr, power seats were an option. That would never fly in North America...