A6 2010 2.0T START SIGNAL...
#1
A6 2010 2.0T START SIGNAL...
Hi~~~^^
A6 2.0TFSI 2010 FWD (BYK)
My car operates the door lock/unlock function with the remote control and can only be started with the key without the push start button.
So I want to buy a push-start module from aftermarket and work with DIY.
My wife's old car bmw 96, E39 connected the signal at the key box contact to complete the push start, but the A6 seems to be connected to the E415 with the control module instead of the key box direct contact.
I need 4 signals of ACC, IG1, IG2, START and my car has no start button, so the T8I 8 pin connector of E415 is empty.
Please let me know if you know where to connect the above signals to the access/start control module or E415.
Thank you~~~ ^^
A6 2.0TFSI 2010 FWD (BYK)
My car operates the door lock/unlock function with the remote control and can only be started with the key without the push start button.
So I want to buy a push-start module from aftermarket and work with DIY.
My wife's old car bmw 96, E39 connected the signal at the key box contact to complete the push start, but the A6 seems to be connected to the E415 with the control module instead of the key box direct contact.
I need 4 signals of ACC, IG1, IG2, START and my car has no start button, so the T8I 8 pin connector of E415 is empty.
Please let me know if you know where to connect the above signals to the access/start control module or E415.
Thank you~~~ ^^
Thread
Thread Starter
Forum
Replies
Last Post
ggaby8610
A6 / S6 (C6 Platform) Discussion
3
05-03-2012 01:58 AM
justinm0424
A6 / S6 (C6 Platform) Discussion
3
02-22-2012 05:51 PM
triplecore
A6 / S6 (C6 Platform) Discussion
4
06-15-2009 07:14 PM