freshfrompacificrim

Another problem to add, which frankly scares me.
CEL came on (not blinking), however at idle it is very rough, but drives ok.

Via Vagcom:


2 Faults Found:

000838 - Camshaft Position Sensor (G163)
P0346 - 006 - Implausible Signal - MIL ON
Freeze Frame:
Fault Status: 11100001
Fault Priority: 4
Fault Frequency: 12
Reset counter: 40
Mileage: 138550 km
Time Indication: 0
Date: 2012.04.30
Time: 15:29:13

Freeze Frame:
RPM: 768 /min
Mass Air / Rev.: 190.8 mg/str
Temperature: 52.5°C
Idle
Bin. Bits: 00010000
Speed: 0.0 km/h

005715 - Please check DTC Memory of ABS Controller
P1653 - 008 - - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 2
Fault Frequency: 2
Reset counter: 40
Mileage: 138548 km
Time Indication: 0
Date: 2004.06.03
Time: 12:02:36

Freeze Frame:
RPM: 544 /min
Mass Air / Rev.: 223.5 mg/str
Temperature: 81.0°C
Idle
Load: 40.0 %
Speed: 0.0 km/h


Readiness: 0010 0101



Please help!

Davey Polymeris

What was the problem?

KevinGary

The OP has not logged onto the forum in over 4 years, so he may not respond.

Davey Polymeris

Worth a shot

Unruled

Looking at the VCDS screenshot though I'd guess his camshafts were way out of whack :P