Driver's side fog light grille
#1
Audiworld Junior Member
Thread Starter
Join Date: Feb 2014
Location: Jeannette, PA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Driver's side fog light grille
Gents,
Knowing all well this is a long shot, does anyone have a driver's side fog light grille available for sale? Let me know if you or someone you know does.
Thanks!
Chris
Knowing all well this is a long shot, does anyone have a driver's side fog light grille available for sale? Let me know if you or someone you know does.
Thanks!
Chris
#2
I'll sell mine for $1000.
Ebay may be your friend here. Also perhaps try Shokan (chances are they'll charge more though).
When you do get one, secure it to the car somehow. When I installed my HID fog lights I zip tied the grills so I'd never lose 'em. Thinking back now, I'd probably use a fine steel wire next time I'm down there. Zip ties get brittle pretty quickly, especially when exposed to the elements.
Ebay may be your friend here. Also perhaps try Shokan (chances are they'll charge more though).
When you do get one, secure it to the car somehow. When I installed my HID fog lights I zip tied the grills so I'd never lose 'em. Thinking back now, I'd probably use a fine steel wire next time I'm down there. Zip ties get brittle pretty quickly, especially when exposed to the elements.
Last edited by S8ilver; 03-19-2014 at 09:38 AM.
#3
I've been looking for both sides for my 01. I still haven't found anything. Shokan didn't have any last time I checked. There is a guy selling aftermarket ones on Ebay, but he never has a pair and I've had little success with messaging him.
Last edited by JAA 4.2; 03-20-2014 at 05:31 AM.
#4
AudiWorld Senior Member
If you're looking for the right fog light grill? It's only $45.90 at ECS Tuning. But you're probably looking for the right lower grill; which will set you back $236.33. OUCH!
http://www.ecstuning.com/Audi-D2_S8-.../Front_Bumper/
Not many options. Good luck.
http://www.ecstuning.com/Audi-D2_S8-.../Front_Bumper/
Not many options. Good luck.
#5
AudiWorld Senior Member
Join Date: Aug 2006
Location: Melbourne, Victoria, Australia
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
#6
Audiworld Junior Member
Thread Starter
Join Date: Feb 2014
Location: Jeannette, PA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the replies gents.
Yeah, TerminA8tor found a post with a guy selling both but he ended up selling the driver's side before I could get him Paypal'ed for both. So, I bought the passenger side off of him.
I am planning on making sure these things dont fall out when I install them. I may get a hold of that guy on Ebay being that I only need one. Think he may actually have a listing for the DS.
Thanks for the website for the grilles as well twentysevenliters.
wondering what shipping would be to USA from the Netherlands.... :-(
Yeah, TerminA8tor found a post with a guy selling both but he ended up selling the driver's side before I could get him Paypal'ed for both. So, I bought the passenger side off of him.
I am planning on making sure these things dont fall out when I install them. I may get a hold of that guy on Ebay being that I only need one. Think he may actually have a listing for the DS.
Thanks for the website for the grilles as well twentysevenliters.
wondering what shipping would be to USA from the Netherlands.... :-(
#7
Trending Topics
#9
Audiworld Junior Member
Thread Starter
Join Date: Feb 2014
Location: Jeannette, PA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
The one I bought is actually one of this guys he made. Its not too bad. Some voids in the plastic but all in all, a lot better than not having one at all. :-)
I think I may just bite the bullet and order one of his.
I think I may just bite the bullet and order one of his.
#10
Fog light grills cheep fix
I lost my offside one on facelift 2.8 and refuse to pay silly money for a bit of molded plastic, i made some up with stainless steel mesh and chrome plastic u shape trim fitted 5M double sided tape, and fixed with s/s screws £15
It takes a bit of time to clip the right shape, you can use the one you have lost to make a stencil
https://forums.audiworld.com/attachm...1&d=1398376619
Going to do the same with the middle section to make it look flatter and wider
It takes a bit of time to clip the right shape, you can use the one you have lost to make a stencil
https://forums.audiworld.com/attachm...1&d=1398376619
Going to do the same with the middle section to make it look flatter and wider
Thread
Thread Starter
Forum
Replies
Last Post
fgutier1
Performance and Tuning
0
09-14-2018 04:56 PM