Paging Ryoung ... what is the offset on your HREs??
#2
ET39 ...
and a 9" wide wheel.
I don't have an H&R suspension, but this won't affect anything. Clearance on the inside is limited by the wheel uprights. It's tightest in the front where I've got about 1/2" between the upright and the tire. There's gobs of room in the rear.
The pic shows the clearance with the Alcons's, but ... The caliper/spoke clearance is determined by the offset of the caliper adapter and the caliper itself. Every brake kit is probably different.
<img src="http://pictureposter.audiworld.com/17157/spoke_gap_2.jpg">
I don't have an H&R suspension, but this won't affect anything. Clearance on the inside is limited by the wheel uprights. It's tightest in the front where I've got about 1/2" between the upright and the tire. There's gobs of room in the rear.
The pic shows the clearance with the Alcons's, but ... The caliper/spoke clearance is determined by the offset of the caliper adapter and the caliper itself. Every brake kit is probably different.
<img src="http://pictureposter.audiworld.com/17157/spoke_gap_2.jpg">
Thread
Thread Starter
Forum
Replies
Last Post
Lurk'n
Audi 90 / 80 / Coupe quattro / Cabriolet
6
10-15-2002 11:45 AM
prototypeA4(Tom)
Florida Discussion
1
06-05-2002 06:11 AM