Emmanuel Maldonado

Does anyone have any info on how to do the engine mounts on a A8 d3 4.2fsi 2008

Mister Bally

Define "Do" for us.

Emmanuel Maldonado

Replace them

Audimate

eBahn shows they should operate around 1100rpm from soft to hard. Have you confirmed there is no changed in the signal to the engine mounts?

Mister Bally

Support engine with proper engine support tool. Remove mounts per procedure in service manual (front fascia and Lock Carrier require removal or at least placed into service position). When reinstalling mounts, replace all torque to limit (stretch) bolts and aorque to spec then rotate the additional fraction of a turn as noted in the service manual.

a_very_naudi_guy

Thanks Mister Bally. I will have to do an engine mount sooner or later as well; the Audi techs listed it as "ruptured" a while back and VCDS reports something. I don't feel anything (yet) but it's there.