shaking... all this shaking!

Thread Tools
 
Search this Thread
 
Old 08-03-2003, 06:00 AM
  #1  
AudiWorld Super User
Thread Starter
 
rocketaudi's Avatar
 
Join Date: Sep 2001
Posts: 2,908
Likes: 0
Received 0 Likes on 0 Posts
Default shaking... all this shaking!

this is intersting. it kinda freaks me out. when im accelerating or even just cruising along the car runs very nicely. but, lets say im in first and i accelerate to like 15 mph and then just let off the gas. it sounds like my cars innards just fell right out the bottom. and if i coast to a stop(almost) in gear, it bucks pretty bad. im also getting a clunk every now and then when i turn the wheel far right or left. i havent had a chance to get under it and look yet but i cant even think what might be wrong. any ideas?
Old 08-03-2003, 02:40 PM
  #2  
New Member
 
unipurify's Avatar
 
Join Date: Jun 2003
Posts: 457
Likes: 0
Received 0 Likes on 0 Posts
Default Re: shaking... all this shaking!

Maybe ring and pinion gear teeth missing. Drain the trans (again) and look for chunks of metal. Run a magnet through the oil in the drain pan.
Old 08-03-2003, 10:21 PM
  #3  
Junior Member
 
Nervikterklieb's Avatar
 
Join Date: Oct 2002
Posts: 1,135
Likes: 0
Received 0 Likes on 0 Posts
Default motor mounts... the procedure...

when replacing them or installing a new motor, always run the motor at idle before tightening them down, this centers the engine on them, and prvides a smoother ride.
also, they could be shot.
Old 08-04-2003, 12:48 PM
  #4  
AudiWorld Super User
 
lemieux@curbside's Avatar
 
Join Date: Dec 2002
Posts: 17,772
Likes: 0
Received 0 Likes on 0 Posts
Default that's what i have ... chech the A arm bushings, one of mine is gone and it rattles sometimes bad

when u break to come to a stop sometimes it shakes like crazy.. but i looked under , and i pulled the weel back and forth and i spoted it, the bushing toward the back of the car ..
this weekend i will replace it, along with CVBOOT on the same side..
Old 08-04-2003, 08:00 PM
  #5  
AudiWorld Super User
Thread Starter
 
rocketaudi's Avatar
 
Join Date: Sep 2001
Posts: 2,908
Likes: 0
Received 0 Likes on 0 Posts
Default

all control arm bushings done w delrins.. its gotta be something else
Old 08-04-2003, 10:04 PM
  #6  
New Member
 
B_WALLACH's Avatar
 
Join Date: May 2003
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts
Default Re: shaking... all this shaking!

I'd check out the CV joints, driveline and motor mounts. I had totally bad front a-arm bushings that I had to replace and they just clunked when I hit the brake but never caused any shakes. My bet is on the CV's or driveline. The clunk you mention could be the bushings but it sounds like you have more than one problem with your car. The slowdown bucking sounds like CV's but you might have the wheel bearings checked as well. How many miles are on this car?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
difficulTT
TT (Mk1) Discussion
9
01-15-2008 10:19 AM
S4orce2001
S4 / RS4 (B5 Platform) Discussion
10
11-09-2004 06:06 AM
LUCIFA
S4 / RS4 (B5 Platform) Discussion
2
12-14-2001 06:13 AM
Ken 4000
Misc. Models Discussion
2
05-28-2001 08:00 PM
sjames
S4 / RS4 (B5 Platform) Discussion
12
04-30-2001 01:50 PM



Quick Reply: shaking... all this shaking!



All times are GMT -8. The time now is 12:04 PM.