1991 Audi V8q PARTOUT
#1
1991 Audi V8q PARTOUT
Unfortunately the underbody is not worth saving , but all the other parts in great condition to good.
The car has 66,000 miles and has a full rare interior , the body panels have minimal to no rust ,
V8 3.6 broke a timing belt . Used to run back in 05 , trans is suppose to be good .
Taillights are in great condition .
Pm
With needs or text 440-856-6849
#2
AudiWorld Member
Join Date: May 2010
Location: Bellingham, WA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Since the low miles, if anyone want's to save the car, I'd pull the heads off one of the spare motors and sell for reasonable, if it hasn't already got parted beyond help
#3
#4
AudiWorld Member
Join Date: May 2010
Location: Bellingham, WA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Ha, you don't have to tell me about that, I parted 3 and the last one was more than a couple of years ago...Bummer is the car looks clean/rare color package. Too bad there's only a handful of people willing to save it and they're spread out, and nobody will pay for shipping a dead V8 across country as the shipping might cost the running value of car....Good luck, I forwarded it to everyone who might care, Tom
#5
AudiWorld Member
Join Date: May 2010
Location: Bellingham, WA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Do you still have the car? If the brake proportioner valve in the rear(thing with spring/brake lines attached) is still functional, I need that to save a car I sold thats pushing 300K and runs great, just need valve(have rest)..Thanks, Tom
#6
AudiWorld Member
Join Date: May 2010
Location: Bellingham, WA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Hey guy, got new Mac and have been fixing stuff for a week/somehow yours/many got deleted from my phone/email. I haven't found my spare brake proportioner valve, so wondering if you still have/how much? I'm going out to the middle of nowhere in May to throw 2 axles on that car and replace that valve.....Hope all's well. Tom. toml99@todomundo.com
Trending Topics
#10
AudiWorld Member
Join Date: May 2010
Location: Bellingham, WA
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Pretty sure he crushed the car a year ago. I'd have a hydraulic shop rebuild yours....If nobody local to you is capable Spokane House of Hose has done lots of V8 hoses over the years. I've had them do 3 sets and all are still leak free. Think it was around $200 to do all 3 main ones. If you have someone do it, the pressure hose has a smaller plastic hose inside it to dampen pressure waves. If they don't put it back in it will make annoying groan. The stock hoses were stupid expensive and one of the worst made parts on these cars. When I first got the Lago car I spent the $200 for the pressure hose from the dealer and it was leaking a year later....Good luck, Tom`