Go Back  AudiWorld Forums > Audi Models > Audi A3 / S3 / RS 3 > Audi A3 / S3 / RS 3 MKII
Reload this Page >

25% Discounts! - Revo by Alcon 355 and 380mm Big Brake Packages...

Audi A3 / S3 / RS 3 MKII Discussion forum for the 2015 and up Audi A3, S3 and RS3 - including the upcoming E-tron and TDI models

25% Discounts! - Revo by Alcon 355 and 380mm Big Brake Packages...

 
Old 05-23-2018, 09:00 AM
  #1  
Audiworld Basic Sponsor
Thread Starter
 
Join Date: Sep 2006
Location: California
Posts: 1,510
Likes: 0
Received 0 Likes on 0 Posts
Default 25% Discounts! - Revo by Alcon 355 and 380mm Big Brake Packages...



Revo by Alcon 380x32mm Big Brake Package – $2665.00 set
(Retail - $3595.00)

Revo by Alcon 355x32mm Big Brake Package – $2665.00 set (Retail - $3595.00)

Information:
  • New Floating Systems — Newly developed floating system allows greater heat handling capacity and quieter running.
  • No More Fade — Higher heat absorption and dispersion for shorter stops, turn after turn.
  • No Warping — Specially designed two-piece floating rotors for quiet, warp-free performance.
  • Quicker Reaction Time — Short consistent pedal travel can save your life in a panic situation.
  • Improved Pedal Feel — Firm confidence-inspiring brake pedal due to ultra-stiff calipers, differential piston sizing and stainless steel braided lines.
  • Less Weight — Enables shorter stops, quicker acceleration, improved steering feel and handling.
  • Lower Long-Term Maintenance Costs — Cutting-edge design in a durable, low-cost system.
  • Compatibility and Ease of Installation — Compatible with ABS and traction control systems with brake bias designed to ensure ultimate gripping power; all hardware is included to ensure a quick and seamless installation.
Brake Calipers:
Revo by Alcon calipers are cast from one piece of aluminum. This single casting design with the cross bridges cast in place creates a very stiff unit and very little compliance during braking. Less compliance means less pedal travel because the brake fluid is only applying force to the pistons, not bending the caliper. This applies the maximum amount of force to the Ferodo performance brake pads. Our brakes use ultra-high-resilience piston seals, with proprietary retraction angle shape, minimising piston travel distance for less dead pedal travel and resulting in better pedal feel in the vehicle.

Brake Rotors:
Racers have long used floating disc technology, but the discs found on racecars move freely on the floating pin drive connecting the bell to the disc, causing noise. To eliminate the rattling race disc for our street car customers, we have re-engineered the floating system using noise-reducing methodology that eliminates noise but still allows for thermal expansion with expanding floating capabilities to handle higher temperatures.
  • Crescent grooves in the surface of our Alcon brake disc perform three basic functions: Increases initial friction between the disc and pads, producing more bite, continuously refreshes the brake pad surface by removing debris from the pad and prevents build up of gas from the phenolics within the pads.
  • Our brakes rotors 252 vanes to draw air from the center of the disc outward. These vanes work like a pump to move cool air through the center of the disc, taking the heat away from the disc and cooling it before the next heavy braking zone.
Brake Pads:
Ferodo DS2500 Brake Pads offer low and high speed braking efficiency, reduced stopping distances and a consistent brake pedal feel from the start. This new generation of friction material is very low in compressibility ensuring a firm pedal, whilst still providing low wear rates for discs and pads. Combined with low wheel dusting and good noise characteristics, this compound is the brake pad for the driver who demands the ultimate in track day braking performance.

Brake Lines:
Hosetechnik Stainless Brakeline Kits are manufactured with the finest quality hose, consisting of a PTFE inner and stainless steel braided outer to improve braking performance, eliminate the spongy feel of the original rubber hoses, and provide superior resistance to abrasion and corrosion. These kits not only provide the reliability and safety demanded in a brake system, but offer good looks that improve the appearance of any installation.

Brake Fluid:
Motul Dot 5.1 brake fluid is a long life 100% synthetic brake fluid suitable for all types of hydraulic actuated-brake and clutch systems that require DOT 5.1, DOT 4 and DOT 3 manufacturers’ brake fluid recommendations.
Particularly suitable for use with anti-lock braking systems (ABS).
  • Long life brake fluid
  • 100% synthetic brake fluid from polyglycol bases.
  • Dry boiling point 270 °C / 518 °F
  • Wet boiling point 185 °C / 365 °
Fitment:
Wheel templates are available upon request. Please email to receive these if required: [email protected]

Delivery:
Some kits are ready to ship for your order depending on caliper color and rotor sizing. Delivery estimates can be obtained via PM or email: [email protected] Shipping is via major carrier to all locations, any duty/brokerage fees are the responsibility of the recipient if located outside of the US.

Questions, Quotes:
If you would like a quote including delivery please add the product to your cart and view the cart to estimate. If you have any questions or needs other than those posted above please don't hesitate to PM or email: [email protected]

Thanks!
Alex@Europrice.us is online now  
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post


Thread Tools
Search this Thread
Quick Reply: 25% Discounts! - Revo by Alcon 355 and 380mm Big Brake Packages...


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: